Owner`s manual

:lirjB.'._FJIllF:'J.'ET;ll'_elamr°
Once you have installed the XM Mini-Tuner Dock,
inserted the XM Mini-Tuner, connected the XM
Mini-Tuner Dock to your XM Ready® home audio
system, and installed the antenna, you are ready to
subscribe and begin receiving XM programming. There
are three places to find your eight character XM Radio ID:
on the XM Mini-Tuner, on the XM Mini-Tuner package,
and on XM Channel 0. Record the Radio ID in the
following eight squares for reference.
r--lr--lr--lr--lr--lr--lr--lr--1
The XM Radio ID does not use the letters 'T', "O", "S" or "F".
Activate your XM Satellite Radio service in the U.S. online at
http:llwww.xmradio.com/or call 1-800-XM-RADIO
(1-800-967-2346). You will need a major credit card. XM will
send a signal from the satellites to activate the full channel lineup.
Activation normally takes 10to 15 minutes, but during peak busy
periods you may need to keep your XM Ready home audio
system on for up to all hour. When you can access the full channel
lineup on your XM Ready home audio system you are done. For
more information or to subscribe in Canada, visit XM on the Web
at www.xmradio.ca or call XM's Listener Care at
1-877-GET-XMSR (1-877-438-9677).
Press QINPUT <1/c> repeatedly (or press
@XM) to select "XM" as the input source.
The cursor on the left of the XM indicator lights up in
the front panel display and the XM Satellite Radio
information (such as channel number, channel name,
category, artist name, or song title) for the currently
selected channel appears in the front panel display.
Lights up
MUL_e_ DVR V-AUX DTV/CBL DVD M_CD-R CD _En
1
When you select "XM" as the input source, this unit
automatically recalls the previously selected channel.
• The XM Satellite Radio signals cannot be output at the
AUDIO OUT (REC) jacks.
• If a status message or an error message appears in the front
panel display or in the OSD, see the "XM Satellite Radio"
section in "Troubleshooting" on page 78 for appropriate
remedies.
2 Search for a channel by using one of the XM
Satellite Radio search modes.
• To select a channel from the all channel list, see
"All Channel Search mode" on page 48.
• To select a channel by category, see "Category
Search mode" on page 48.
• To select a channel from the preset channels, see
"Preset Search mode" on page 48.
• To select the desired channel directly by entering
the channel number, see "Direct Number Access
mode" on page 48.
-4'--
• You can use the Neural Surround decoder to enjoy the XM HD
surround sound content of the XM Satellite Radio broadcasts in
multi-channels (see page 39).
• You can set the XM Satellite Radio preset channels (see
page 49).
• You can display the XM Satellite Radio information in the front
panel display or in the OSD (see page 50).
47 En