Owner`s manual

Before performing the following operations, press
_SIRIUS.
You can use this feature to store up to 40 SIRIUS Satellite
Radio channels (A1 to E8:8 preset channel numbers in
each of the 5 preset channel groups). You can then recall
any preset channel easily by selecting the preset channel
group and number as described in "Preset Search mode"
on page 53.
Search for a channel you want to set as a
preset channel by using one of the SIRIUS
Satellite Radio search modes,
See "Basic SIRIUS Satellite Radio TM operations" on
page 52 for details.
::J ::J J-L .--: J, _'.. J, :,J .--: = : a. ,.,,
Currently channel number
2
Press @MEMORY (or @MEMORY),
The MEMORY indicator flashes in the front panel
display for approximately 30 seconds.
..... NENORY.....
Flashes
3
You must proceed to and carry out steps 3 through 5 while
the MEMORY indicator is flashing in the fi'ont panel
display.
Press @CATEGORY (or @A-E/CAT. <1/ I>)
repeatedly to select a preset channel group
(A to E) while the MEMORY indicator is
flashing.
The preset channel group letter appears in the front
panel display.
Flashes
"-..... 0 2 3 Ha :i..... i..i
i
Currently selected preset channel group
Press @PRESET/TUNING/CH <1 /
(or @ PRESET/CH A / V) repeatedly to select
a preset channel number (1 to 8) while the
MEMORY indicator is flashing,
The preset channel number appears in the front panel
display.
Flashes
iZi "i iZ::i9 "Z i-.-i:::,"i i-"- H :::,
= :_ '=." .,,....=,, = : .,.,._ =... = = : .=,_,
Currently selected preset channel number
Press @MEMORY (or @MEMORY) to set
the selected SIRIUS Satellite Radio channel
as a preset channel while the MEMORY
indicator is flashing,
A colon (:) appears next to the preset channel number
for confirmation, and the MEMORY indicator turns
oft"in the front panel display.
/
i:::i 2 :i!!:H J.i.... i..i ]
Colon (:)
Once you set a new preset channel, the one previously stored in
the same preset channel group and number is cleared.
You can use the Parental Lock feature to limit the access
to the desired SIRIUS Satellite channels. This unit
automatically skips the locked channels when this unit is
in the All Channel Search mode or Category Search mode
and you search a channel by pressing
@PRESET/TUNING/CH <_ / _>
(or @PRESET/CH A / V).
• Setting the code number and the locked
channels
Use this feature to set the Parental Lock code number
(PIN) and select the channels to be locked.
1 Press @AMP on the remote control and then
press @MENU to display.
2 Press @V to select "MANUAL SETUP" and
then press @ ENTER.
54 En