Owner`s manual

• Tuner

FM stereo reception is

noisy.

There is distortion, and

clear reception cannot

be obtained even with a

good FM antenna.

The desired station

cannot be tuned into

with the automatic

tuning method.

The characteristics of FM stereo

broadcasts may cause this problem

when the transmitter is too far away or

the antenna input is poor.

There is multi-path interference.

The signal is too weak.

Check the antenna connections. 20

Try using a high-quality directional FM

antenna.

Use the manual tuning method. 43

Adjust the antenna position to eliminate

multi-path interference.

Use a high-quality directional FM antenna.

Use the manual tuning method. 43

Previously preset This unit has been disconnected t_r a Set preset stations. 44

stations can no longer long period.

be tuned into.

The desired station Tile signal is weak or tile antenna Tighten tile AM loop antenna connections --

cannot be tuned into connections are loose, and orient it for the best reception.

with the automatic

tuning method. 43

Use the manual tuning method.

AM There are continuous Noise can result from lightning, Use an outdoor antenna and a ground wire.

crackling and hissing fluorescent lamps, motors, thermostats This will help somewhat, but it is difficult to

noises, and other electrical equipment, eliminate all noise.

There are buzzing and A TV set is being used nearby. Move this unit away from the TV set. --

whining noises.

81 En