Owner`s manual

Place your speakers in the room and connect them to this
unit.
Place your speakers and subwoofer in the
room.
2 Connect speaker cables to each speaker.
3
f
Cables are colored or shaped differently, perhaps with
a stripe, groove or ridge. Connect the striped
(grooved, etc.) cable to the '%" (red) terminals of
your speaker. Connect the plain cable to the "-"
(black) terminals.
Connect each speaker cable to the
corresponding speaker terminal of this unit.
_1_ _2 _3_ _4
Make sure that this unit and the subwoofer are
unplugged from the AC wall outlets.
@ Twist the exposed wires of the speaker cables
together to prevent short circuits.
@ Do not let the bare speaker wires touch each other.
@ Do not let the bare speaker wires touch any metal
part of this unit.
4
i
,rr/R,'lRgril.,,,g;r-
Be sure to connect the left channel (L), right channel
(R), '%" (red) and "-" (black) properly.
Front and center speakers
f
To th epent
To the front To the front
right speaker left speaker
1
Surround speakers
÷rg
To the surround To the surround
right speaker left speaker
Connect the subwoofer cable to the input
jack of the subwoofer and the SUBWOOFER
OUTPUT jack of this unit.
Subwoofer
s
s
AV receiver
SUBWOOFER
OUTPUT jack
Subwoofer cable
SEn