Submittal Sheet

Bronze Low Pressure Gas Valve - Plug Style - Gas Only
Flat / Tee Head with Check – 10596
Inlet: FNPT Thread, Outlet: FNPT Thread
SUBMITTAL DATA SHEET
Bronze body and plug manually operated low pressure natural or propane gas valve for use indoors on house piping system between
the meter oulet and the inlet connection of the gas appliance at ambient temperatures of 32 to 125 degrees Fahrenheit.
- Sizes: 1/4”, 3/8”, 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2”
- 2 PSIG
- NOTE: All A.Y. McDonald plug style gas valves are factory set.
DO NOT TAMPER WITH BOTTOM NUT.
SUBMITTAL INFORMATION
WARNING: It is unlawful in CALIFORNIA & VERMONT (effective 1/1/2010); MARYLAND (effective 1/1/2012); LOUISIANA (effective 1/1/2013) and the UNITED STATES
OF AMERICA (effective 1/4/2014) to use THIS PRODUCT in the installation or repair of any public water system or any plumbing in a facility or system that provides water
for human consumption. The wetted surface area of THIS PRODUCT has a weighted average lead content greater than 0.25%.
A.Y. McDonald considers the information on this assembly drawing correct when published. Item and option availability, including specications, are subject to change without notice.
Submitted by: 5-14
A.Y. McDonald Mfg. Co. Toll Free: 1-800-292-2737 [e-mail]
P.O. Box 508 Fax: [phone] www.aymcdonald.com
Dubuque, IA 52004-0508 Hours: 7:00 a.m. - 5:00 p.m., CST
Size A B C D E F G H
1/2” 1.00 1.00 .63 1.28 1.27 1.06 1/2 .28
3/4” 1.16 1.16 .75 1.59 1.39 1.28 3/4 .28
Size A B C D E F G H
1/4” .93 .93 .56 1.47 1.19 .94 1/4 .25
3/8” .93 .93 .56 1.47 1.19 .94 3/8 .25
1” 1.38 1.38 1.05 1.67 1.58 1.59 1 .32
1 1/4” 1.61 1.61 1.19 1.96 1.98 2.19 1 1/4 .38
1 1/2” 1.70 1.70 1.38 1.94 2.09 2.25 1 1/2 .44
2” 2.18 2.18 1.88 2.54 2.38 2.75 2 .50
Dimensions
Dimensions
1/2" & 3/4" bottom check
All other sizes top check
1/2” & 3/4” valves manufactured to:
B16.44 5 PSIG
Non-Potable
Use Only
E
D
H
C
H
C
D
E
A B
"G" FNPT
THREAD
CHECK
"F"-FLAT
OF HEX
"G" FNPT
THREAD
CHECK
"F"-FLAT
OF HEX.
E
D
H
C
H
C
D
E
A B
"G" FNPT
THREAD
CHECK
"F"-FLAT
OF HEX
"G" FNPT
THREAD
CHECK
"F"-FLAT
OF HEX.