WITHOUT YOU THERE IS NO US.
Table of Contents General Information Page General Information..................................................................... 2-8 Freight Program...............................................................................3 Trade Customs.................................................................................4 Traceability......................................................................................6 Natural Gas Ball Style Natural Gas Ball Style....................................
General Information Freight Program I. PRODUCT GROUP QUALIFICATION LEVELS 1. High Pressure Gas (may be combined with plumbing Valves) ............................................................................................. $2,500 Net 2. Water Service Products (may be combined with Curb Boxes, Pumps, Pump Accessories, Plumbing Valves, Frames & Covers, HPG, and Yoke Boxes) .............................................................................................................................
General Information General Information Trade Customs CONTROLLING PROVISIONS: These terms and conditions supersede all previous terms and conditions and shall control any sale by A.Y. McDonald Mfg. Co. (“Seller”). No alteration or waiver of these terms and conditions shall be valid unless specifically accepted in writing by an authorized representative of Seller. PRICES: Billing prices are those in effect at the time the order is shipped. All prices are subject to change without notice.
General Information YOU SPOKE AND WE LISTENED. A.Y. McDonald has been assembling for a long time but we are doing it for the first time ever as a full Meter Set Assembly. Our Meter Set Assemblies combine safety, testing, technology, innovation, and customer service in a single solution. With 163 years of expertise and knowledge to rely on, you won’t be disappointed with the result! General Information METER SET ASSEMBLY - SAFETY, TESTING, TECHNOLOGY, INNOVATION, CUSTOMER SERVICE. At A.Y.
General Information General Information WE L C O M E T O THE STANDARD OF SAFETY. A.Y. McDonald designs and manufactures our natural gas products to comply with several industry standards – ASME, ANSI, and ASTM. But as of May 1, 2015, we took this a step further by starting to mark A.Y. McDonald natural gas products with a new barcode that was developed in the new ASTM F-2897-14 standard. As a real game changer, A.Y.
General Information Meter Bar Meter Swivel Meter Nut General Information Nipple Integral Union Outlet Valve Meter Swivel Gasket Meter Nut Plug Nipple Riser Valve A.Y. McDonald Mfg. Co. is known in the gas industry for its wide variety of house piping valves and gas meter valves. Serving the needs of gas utilities is our number one priority. The items indicated above are the products we currently offer, produced at our state-ofthe-art manufacturing facilities.
General Information General Information YOU CAN’T SPELL SAFETY WITHOUT A.Y. SAFETY - NO ROOM FOR MISTAKES. BALL VALVES. As a solution that can make life for you and your customers’ that much easier, A.Y. McDonald’s Gas Ball Valve is a pretty big deal. After all, we proudly place our name on each and every A.Y. McDonald gas valve in the hopes that when you recognize it, you will think if safety, dependability, and a long-lasting product. At A.Y.
General Information General Information Ball Style Natural Gas Ball Style 4-19 MORE THAN A BRAND. WE’RE A FAMILY. 800.292.2737 | sales@aymcdonald.com | aymcdonald.
Natural Gas Ball Valves Natural Gas Meter Ball Valves 175 PSIG BALL STYLE METER VALVES Precision machined and offers bubble tight leak protection both open and closed. Ball Valves offer the added feature of lower and more closely controlled operating torques for the life of the valve. The brass ball rides between two PTFE port seals that require no lubrication. The stem has a double o-ring seal and cannot be removed from the valve.
Natural Gas Ball Valves Natural Gas Ball Valves - 860 Series TAMPERPROOF, 175 PSIG, FLAT HEAD, BRASS BALL, LOCKWING These valves are designed for use with natural, manufactured and L.P. gas only.
Natural Gas Ball Valves TURN TO US FOR YOUR VALVES. NATURAL GAS PLUG VALVES Ball Style There’s no room for mistakes in the natural gas industry. As a concept that never goes out of style, safety is at the core of the creation for A.Y. McDonald’s Gas Plug Valves. Trust in a company that has seen success for 163 years – and many more to come! At A.Y.
Natural Gas Ball Valves Ball Style Plug Style Natural Gas Plug Style 4-19 MORE THAN A BRAND. WE’RE A FAMILY. 800.292.2737 | sales@aymcdonald.com | aymcdonald.
Natural Gas Plug Valves Re-Lubrication Tool FOR USE ON 175 PSIG RE-LUBE VALVES & WITH A.Y. MCDONALD GREASE ONLY A.Y. McDonald Mfg. Co. model number 558 Re-Lubrication Tool is an easy and economical way to lubricate 175 PSIG gas meter valves. The tool is machined from steel alloy for durability and has an Allen wrench mounted to the body for convenience. It can be used to re-lubricate A.Y. McDonald valves in the full open or the full closed position when the valve is pressurized or unpressurized.
Natural Gas Plug Valves Natural Gas Meter Plug Valves 175 PSIG PLUG STYLE METER VALVES Precision machined and offer bubble tight leak protection both open and closed. Plug Style Meter Valves can be relubricated while in service. Special machined grooves in the plug channel provide grease to all sealing surfaces. All connections with pipe threads require use of thread sealant at installation. (PTFE tape is not recommended, see instruction sheet.) Iron Body Gas Plug Valves Features - A.Y.
Natural Gas Plug Valves Natural Gas Plug Valves - 559 Series TAMPERPROOF, 175 PSIG, FLAT HEAD, BRASS PLUG These valves are designed for use with natural, manufactured and L.P. gas only. All A.Y. McDonald 175 PSIG Gas Valves may be re-lubricated in the full open or the full closed position when the valve is pressurized or un-pressurized.
Natural Gas Plug Valves Natural Gas Plug Valves - 560 Series TAMPERPROOF, 175 PSIG, FLAT HEAD, LOCKWING, BRASS PLUG These valves are designed for use with natural, manufactured and L.P. gas only. All A.Y. McDonald 175 PSIG Gas Valves may be re-lubricated in the full open or the full closed position when the valve is pressurized or un-pressurized.
Natural Gas Plug Valves Natural Gas Plug Valves - 6276 Series TAMPERPROOF, 175 PSIG, FLAT HEAD, LOCKWING, BRASS PLUG These valves are designed for use with natural, manufactured and L.P. gas only. All A.Y. McDonald 175 PSIG Gas Valves may be re-lubricated in the full open or the full closed position when the valve is pressurized or un-pressurized. All A.Y. McDonald plug style gas valves have factory set turning torque.
Natural Gas Plug Valves Plug Style Bypass Ball Valves 4-19 MORE THAN A BRAND. WE’RE A FAMILY. 800.292.2737 | sales@aymcdonald.com | aymcdonald.
Angle Ball Valves Angle Ball Valves 5 PSIG 3/4” & 1”, 25 PSIG 1 1/4” ANGLE BALL STYLE METER VALVES Precision machined and offer bubble tight leak protection both open and closed. Ball Valves offer the added feature of lower and more closely controlled operating torques for the life of the valve. The brass ball rides between two PTFE port seals that require no lubrication. The stem has a double o-ring seal and cannot be removed from the valve.
Angle Ball Valves Inlets/Type - Block 1 Integral FNPT Meter Swivel Nut O-ring Seal Meter Swivel Nut Flat Gasket Seal Union Inlet Outlets/Type - Block 2 Insulated Union / O-ring Seal FNPT Insulated Union / Flat Gasket Seal FNPT Non Insulated Union / Flat Gasket FNPT Bypass Ball Valves Integral FNPT 4-19 800.292.2737 | sales@aymcdonald.com | aymcdonald.
Angle Ball Valves Meter Outlet / Bypass Ball Valves - 835 Series FOR 835 SERIES OUTLET ANGLE VALVES - BALL STYLE A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular valves, and valves with built in swivels. Meter valves with swivels have two extra blocks before the size to select the size and type of swivels.
Angle Ball Valves Meter Outlet / Bypass Ball Valves - 835 Series TAMPERPROOF, LOCKWING, BYPASS OPTION Can be assembled directly to the meter outlet, or used with a meter bar that provides a solid anchor to the meter set. This valve can be produced with or without a Bypass feature. These valves are designed for use with natural, manufactured and L.P. gas only. 4.32 2.05 3/8” FNPT - Tap A (black iron shown) FNPT OUTLET Tap C INTEGRAL FNPT x INTEGRAL FNPT COATINGS AVAILABLE 2.
Angle Ball Valves Meter Outlet / Bypass Ball Valves - 837 Series FOR 837 SERIES OUTLET ANGLE VALVES - BALL STYLE A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular valves, and valves with built in swivels. Meter valves with swivels have two extra blocks before the size to select the size and type of swivels.
Angle Ball Valves Meter Outlet / Bypass Ball Valves - 837 Series TAMPERPROOF, LOCKWING, UNION, BYPASS OPTION Can be assembled directly to the meter outlet, or used with a meter bar that provides a solid anchor to the meter set. This valve can be produced with or without a Bypass feature. These valves are designed for use with natural, manufactured and L.P. gas only. 5.76 OPTIONAL 3/8” FNPT BYPASS TAP 2.
Angle Ball Valves Meter Outlet / Bypass Ball Valves - 855 Series FOR 855 SERIES OUTLET ANGLE VALVES - BALL STYLE A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular valves, and valves with built in swivels. Meter valves with swivels have two extra blocks before the size to select the size and type of swivels.
Angle Ball Valves Meter Outlet / Bypass Ball Valves - 855 Series TAMPERPROOF, LOCKWING, BYPASS OPTION Can be assembled directly to the meter outlet, or used with a meter bar that provides a solid anchor to the meter set. This valve can be produced with or without a Bypass feature. These valves are designed for use with natural, manufactured and L.P. gas only. 3/8” FNPT - BYPASS PORT SIZE NITRILE O-RINGS PRESSURE TAP (black iron shown) Meter Swivel Nut x Integral FNPT 8.95” .
Angle Ball Valves Meter Outlet / Bypass Ball Valves - 857 Series FOR 857 SERIES OUTLET ANGLE VALVES - BALL STYLE A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular valves, and valves with built in swivels. Meter valves with swivels have two extra blocks before the size to select the size and type of swivels.
Angle Ball Valves Meter Outlet / Bypass Ball Valves - 857 Series TAMPERPROOF, LOCKWING, BYPASS OPTION, UNION Can be assembled directly to the meter outlet, or used with a meter bar that provides a solid anchor to the meter set. This valve can be produced with or without a Bypass feature. These valves are designed for use with natural, manufactured and L.P. gas only. 5.77 NITRILE O-RINGS 3/8” FNPT BYPASS PORT SIZE PRESSURE TAP (black iron shown) 2.
Angle Ball Valves Meter Outlet / Bypass Ball Valves - 875 Series FOR 875 SERIES OUTLET ANGLE VALVES - BALL STYLE A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular valves, and valves with built in swivels. Meter valves with swivels have two extra blocks before the size to select the size and type of swivels.
Angle Ball Valves Meter Outlet / Bypass Ball Valves - 875 Series TAMPERPROOF, LOCKWING, BYPASS OPTION, UNION Can be assembled directly to the meter outlet, or used with a meter bar that provides a solid anchor to the meter set. This valve can be produced with or without a Bypass feature. These valves are designed for use with natural, manufactured and L.P. gas only. 4.32 2.05 3/8” FNPT BYPASS PORT SIZE (black iron shown) Female Union x Integral FNPT FNPT OUTLET 2.
Angle Ball Valves Meter Outlet / Bypass Ball Valves - 877 Series FOR 877 SERIES OUTLET ANGLE VALVES - BALL STYLE A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular valves, and valves with built in swivels. Meter valves with swivels have two extra blocks before the size to select the size and type of swivels.
Angle Ball Valves Meter Outlet / Bypass Ball Valves - 877 Series TAMPERPROOF, LOCKWING, BYPASS OPTION, UNION Can be assembled directly to the meter outlet, or used with a meter bar that provides a solid anchor to the meter set. This valve can be produced with or without a Bypass feature. These valves are designed for use with natural, manufactured and L.P. gas only. FNPT Insulated End 3/8” FNPT Bypass Port Size (black iron shown) 2.
Inline Ball Valves Meter Outlet / Bypass Ball Valves - 861 Series TAMPERPROOF, 175 PSIG, LOCKWING, BYPASS OPTION, BRASS BALL FULL PORT These valves are designed for use with natural, manufactured and L.P. gas only. A (black iron shown) B C COATINGS AVAILABLE DIMENSIONS Size 3/4” 1” A 3.45” 3.59” B 1.79” 1.91” C .76” .96” 861B Black Iron 861G Zinc Coated w/Clear Sealant Finish Iron 861N Zinc Plated Clear Sealant /Painted Finish 861P Painted Finish Weight 1.8 2.
Inline Ball Valves Portable Bypass Kits Portable Bypass Kits 4-19 MORE THAN A BRAND. WE’RE A FAMILY. 800.292.2737 | sales@aymcdonald.com | aymcdonald.
Portable Bypass Kits Portable Bypass Kits Portable Bypass Kits A.Y. McDonald Mfg. Co. brings both safety and convenience to the natural gas industry: the Portable Bypass Kit. This durable and lightweight kit is designed to provide technicians with a safe and easy transport option to the job site when bypassing a meter set for inspection, maintenance, meter change out, regulator, riser valve, or sample testing.
Portable Bypass Kits Portable Bypass Kit - Add On Parts 4819-541 4819-523 4819-520 4819-524 4819-526 4819-004 Part # 4819-004 4819-513 4819-520 4819-523 4819-541 4819-525 Portable Bypass kits 4819-513 4819-006 Add On Parts 891HPNPT PBK Threaded HP Quick Fill Adapter Hex Nipple 1/4” Male Natural Gas Brass w/ Vibraseal Quick Thread Natural Gas Adapter Fitting 1/4” MNPT Natural Gas Needle Valve 1/4” FNPT* Elbow 90º 1/4” MNPT x FNPT High Pressure Brass Part # Add On Parts 4819-006 891 PBK 1/4” NPT T
Portable Bypass Kits Portable Bypass Kits Portable Bypass Kit - Replacement Parts 4819-504 4819-505 4819-512 4819-073 4819-524 Part # 4819-504 4819-505 4819-506 4819-507 4819-508 4819-511 4819-512 4819-513 4819-514 4819-515 4819-516 4819-517 4422-073 4901-161 38 4819-513 4901-161 4819-525 4819-506 4819-514 4819-518 4819-526 Replacement Parts Aluminum Bypass Box - Complete Weld and Powder Coat CGA 350 Aluminum Cylinder Natural Gas Regulator - Methane Low Pressure Regulator 5” - 10” WC CNG 1/
Portable Bypass Kits Portable Bypass kits Cast Iron Meter Bars Natural Gas Cast Iron Meter Bars 4-19 MORE THAN A BRAND. WE’RE A FAMILY. 800.292.2737 | sales@aymcdonald.com | aymcdonald.
Cast Iron Meter Bars Meter Bars A.Y. McDonald Mfg. Co. Cast Iron Meter Bars have heavy, one piece I-Beam construction to protect the meter from piping stresses and ensure a solid installation. Gas Meter Bars without Integral Swivels National Pipe Threads (NPT) are provided on the inlet, outlet, and bottom swivel taps. A. Y. McDonald meter bars can fit most requirements by using them with a combination of straight or offset meter swivels.
Cast Iron Meter Bars Integral Outlets - Block 6 FNPT threads MNPT threads Insulated Union Outlets - Block 6 - Insulated tailpiece has second o-ring molded into the plastic to improve sealing without over-tightening the union nut.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars - 6600 Series HORIZONTAL INLET & OUTLET, NO ATTACHED SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. 11.48 1.4 A 1.42 FNPT x Union 3.25 C C 6.5 Insulated Union (black iron shown) B Cast Iron Meter Bars DIMENSIONS Centerline 6 1/2” A FNPT Inlet 3/4” or 1” B FNPT Outlet 3/4” or 1” C FNPT Swivel Tap Size 3/4” or 1” 9.95 2.00 1.42 FNPT x FNPT B A 3.25 C (black iron shown) C 6.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars - 6610 Series HORIZONTAL INLET & OUTLET, NO ATTACHED SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. 10.87 1.4 A 1.43 3 C C 6 Insulated Union FNPT x Union (black iron shown) FNPT x FNPT (black iron shown) B Cast Iron Meter Bars DIMENSIONS A FNPT Inlet 3/4” or 1” Centerline 6” B FNPT Outlet 3/4” or 1” C FNPT Swivel Tap Size 3/4” or 1” 9.41 2 1.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars - 6640 Series HORIZONTAL INLET & OUTLET, NO ATTACHED SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. 12.44 1.4 3.5 A FNPT x Union 1.61 3.5 C C 7 Insulated Union (black iron shown) B Cast Iron Meter Bars DIMENSIONS Centerline 7” A FNPT Inlet 1 1/4” B FNPT Outlet 1 1/4” C FNPT Swivel Tap Size 1 1/4” 10.88 2.13 FNPT x FNPT (black iron shown) 1.6 B A 3.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars - 6604 Series HORIZONTAL INLET & VERTICAL OUTLET, NO ATTACHED SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. B A 4.02 FNPT x Union (black iron shown) 1.42 3.25 C 6.5 Cast Iron Meter Bars C DIMENSIONS A FNPT Inlet 3/4” or 1” Centerline 6 1/2” B FNPT Outlet 3/4” or 1” Only 1” MNPT C FNPT Swivel Tap Size 3/4” or 1” 1.4 A B FNPT x FNPT (black iron shown) 1.42 3.25 C C 6.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars - 6614 Series HORIZONTAL INLET & VERTICAL OUTLET, NO ATTACHED SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. B A 4.02 FNPT x Union (black iron shown) FNPT x FNPT (black iron shown) 1.42 Cast Iron Meter Bars 3 C C 6 DIMENSIONS A FNPT Inlet 3/4” or 1” Centerline 6” B FNPT Outlet 3/4” or 1” C FNPT Swivel Tap Size 3/4” or 1” 1.4 A B 1.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars - 6644 Series HORIZONTAL INLET & VERTICAL OUTLET, NO SWIVELS ATTACHED These bars are designed for use with natural, manufactured and L.P. gas only. B O-ring A 4.25 FNPT x Union (black iron shown) 1.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars - 6684 Series HORIZONTAL INLET & VERTICAL OUTLET, NO ATTACHED SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. B Insulated O-ring seal / FNPT Threads A Photo coming, see website. 4.47” 1.79” FNPT x FNPT Union 4.13” C 8.25” Cast Iron Meter Bars C DIMENSIONS Centerline 8 1/4” A FNPT Inlet 1 1/4” or 1 1/2” B FNPT Union 1 1/4” or 1 1/2” C FNPT Swivel Tap Size 1 1/4” or 1 1/2” B A 8.25” Photo coming, see website. 2.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars with Cast Integral Swivels - 6560 Series INTEGRAL MNPT INLET & OUTLET, CAST INTEGRAL SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. 2.5” 6” 3.6” B (black iron shown) MNPT x FNPT Union 1.99” C Cast Iron Meter Bars C DIMENSIONS Centerline 6” A MNPT Inlet 1” B FNPT Union 1” C Swivel Nut Size 10LT, 20LT, OEM, 1A 10.93” 2.75” B 2.18” 1.99” 1.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars with Cast Integral Swivels - 6570 Series INTEGRAL MNPT INLET & OUTLET, CAST INTEGRAL SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. 15.60” 3.5” B A (black iron shown) 2.40” MNPT x FNPT Union 8.25” C C Cast Iron Meter Bars DIMENSIONS Centerline 8 1/4” 8 1/4” A MNPT Inlet 1” 1 1/4” B FNPT Union 1” 1 1/4” C Swivel Nut Size 20LT 30LT 14.11” 3.50” B 2.36” MNPT x MNPT Gasket Retaining Ring 8.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars with Cast Integral Swivels - 6569 Series INTEGRAL MNPT INLET & OUTLET, CAST INTEGRAL SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. 14.62” 6.00” 5.00” 3.62” 1.99” 1.30” Retaining Ring Gasket A C C MNPT x FNPT Union (black iron shown) 4.75” Cast Iron Meter Bars DIMENSIONS Centerline 6” A MNPT Inlet 3/4”, 1” B FNPT Union 3/4”, 1” C Swivel Nut Size 10LT, 1A, 20LT 13.18” 5” 6” 2.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars with Cast Integral Swivels - 6660 Series HORIZONTAL INLET & OUTLET, CAST INTEGRAL SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. B A 10.90” (black iron shown) FNPT x FNPT Union 2.68” Cast Iron Meter Bars 6” C C DIMENSIONS Centerline 6” A FNPT Inlet 3/4”, 1” B FNPT Union 3/4”, 1” C Swivel Nut Size 20LT or 30LT B 9.45” A (black iron shown) 2.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars with Cast Integral Swivels - 6670 Series HORIZONTAL INLET & OUTLET, CAST INTEGRAL SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. B A 13.20” (black iron shown) 2.68” FNPT x FNPT Union Gasket 8.25” C Cast Iron Meter Bars C DIMENSIONS Centerline A FNPT Inlet B FNPT Union C Swivel Nut Size 8 1/4” 1” or 1 1/4” 1 1/4” 20LT or 30LT B 11.36” A (black iron shown) 2.48” FNPT x FNPT 8.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars with Integral Swivels - 6620 Series HORIZONTAL INLET & OUTLET, INTEGRAL SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. A 10.87” (black iron shown) 3.13” B FNPT x FNPT Union C 3” C 6” Cast Iron Meter Bars DIMENSIONS Centerline 6” A FNPT Inlet 3/4” or 1” B FNPT Union 3/4” or 1” C Swivel Nut Size 10LT, 1A, 20LT, or OEM 9.45” A B (black iron shown) 3.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars with Integral Swivels - 6624 Series HORIZONTAL INLET & VERTICAL OUTLET, INTEGRAL SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. B 1.4” 6” (black iron shown) A 5.53” 1.4” FNPT x FNPT Union 3.1” Cast Iron Meter Bars C C DIMENSIONS A FNPT Inlet 3/4” or 1” Centerline 6” B FNPT Union 3/4” or 1” 1.4” C Swivel Nut Size 10LT, 1A, 20LT, or OEM 6” B (black iron shown) A FNPT x FNPT 1.4” 3.99” 3.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars with Integral Swivels - 6564 Series HORIZONTAL INLET & VERTICAL OUTLET, INTEGRAL SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. 10.46” B A 2.69” C MNPT x FNPT Union Cast Iron Meter Bars 6.00” C DIMENSIONS Centerline 6” A MNPT Inlet 1” B FNPT Union 3/4” or 1” C Swivel Nut Size 10LT, 20LT A (black iron shown) B 10.46” 2.69” C MNPT x FNPT 6.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars with Integral Valve - 6814 Series HORIZONTAL INLET WITH INTEGRAL 1” VALVE & VERTICAL OUTLET - 2 PSIG, NO ATTACHED SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. B 1.69” A 4.1” 3.88” FNPT x FNPT Union (black iron shown) 1.4” 6” C Cast Iron Meter Bars 9.75” 10.75” DIMENSIONS Centerline 6” A FNPT Inlet 3/4” or 1” B FNPT Union 3/4” or 1” C Swivel Nut Size 3/4” or 1” B A 3.88” 2.5” FNPT x FNPT 1.4” 3.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars with Integral Valve - 6918 Series VERTICAL INLET WITH 3/4” SLEEVED UNION VALVE & VERTICAL OUTLET - 2 PSIG, NO ATTACHED SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. A B 5” 3.8” (black iron shown) FNPT x FNPT Union C C Cast Iron Meter Bars 6” DIMENSIONS A FNPT Inlet 3/4” or 1” Centerline 6” B FNPT Outlet 3/4” or 1” C FNPT Swivel Tap Size 3/4” or 1” A B 5” 2.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars with Integral Valve - 6722 Series REAR CENTER HORIZONTAL INLET & VERTICAL OUTLET - 2 PSIG These bars are designed for use with natural, manufactured and L.P. gas only. For CMMC multiple meter manifold applications B Multiple Meter Application Nitrile O-Ring 5.77” (black iron shown) 2.71” C 6722- Black Iron 6722G Zinc Coated w/Clear Chromate Finish Iron 6722P Paint Coated 6722H Zinc & Painted Taps available on all the above product options. 6” A 3.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars with Integral Valve - 6762 Series REAR CENTER HORIZONTAL INLET & VERTICAL OUTLET These bars are designed for use with natural, manufactured and L.P. gas only. For CMMC multiple meter manifold applications Multiple Meter Application B Threaded Lock Insert 5.77” FNPT x FNPT Union C C 3” 6” A 3.
Cast Iron Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Cast Iron Meter Bars Cast Iron Meter Bars with Integral Valve - 6712 Series REAR CENTER HORIZONTAL INLET & VERTICAL OUTLET - NO ATTACHED SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. For CMMC multiple meter manifold applications Multiple Meter Application B 4.
Cast Iron Meter Bars BYPASS THE TROUBLES DON’T INTERRUPT YOUR CUSTOMERS. RESIDENTIAL & COMMERCIAL BYPASS OPTIONS Cast Iron Meter Bars When it comes to bypass technology, A.Y. McDonald is ahead of the game. Gone are the days of scheduling and rescheduling appointments, relighting pilot lights, and all the other pains that come with gas meter change-outs. Make you and your customer’s lives easier with A.Y. McDonald’s many residential and commercial bypass solutions! At A.Y.
Cast Iron Meter Bars Cast Iron Meter Bars Bypass Meter Bars Natural Gas Bypass Meter Bars 4-19 MORE THAN A BRAND. WE’RE A FAMILY. 800.292.2737 | sales@aymcdonald.com | aymcdonald.
Bypass Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Bypass Meter Bars Bypass Meter Bars - 6410 Series HORIZONTAL INLET & OUTLET - 2 INTEGRAL VALVES - 5 PSIG - NO ATTACHED SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. Residential Meter Application 11” Tap 2.25” (black iron shown) FNPT x FNPT Union A B C 3” COATINGS AVAILABLE C 6” 6410- Black Iron 6410G Zinc Coated w/Clear Chromate Finish Iron 6410P Paint Coated 6410H Zinc & Painted Taps available on all the above product options. 4.
Bypass Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Bypass Meter Bars Bypass Meter Bars - 6480 Series HORIZONTAL INLET & OUTLET - 2 INTEGRAL VALVES - 25 PSIG - NO ATTACHED SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. Commercial Bypass Meter Bar 15.71” Downstream Pressure Tap (Position C) Standard Tamperproof Screw A (black iron shown) B FNPT x FNPT Union 3.51” COATINGS AVAILABLE Purge Port (Not optional) Sarndard C” 8.25” 2.73” 4.74” DIMENSIONS Centerline 8.
Bypass Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Bypass Meter Bars Bypass Meter Bars - 6312 Series REAR CENTER HORIZONTAL INLET & VERTICAL OUTLET - 2 INTEGRAL VALVES - 5 PSIG - NO ATTACHED SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. Multiple Meter Application Pos E. Tap Pos. A Tap 6.28” (black iron shown) FNPT x FNPT Union 1.82” 3.35” C C 6” 6312- Black Iron 6312G Zinc Coated w/Clear Chromate Finish Iron 6312P Paint Coated 6312H Zinc & Painted Taps available on all the above product options. 4.
Bypass Meter Bars Meter Bars FOR CAST IRON METER BARS & BYPASS METER BARS A.Y. McDonald Mfg. Co. Gas Meter Bars can be ordered to fit your requirements. Select the features you need from list below and build your own ordering number. Please note the difference in numbers between regular meter bars, and meter bars with built in swivels. Meter bars with swivels have two extra blocks before the size to select the size and type of swivels.
Bypass Meter Bars Bypass Meter Bars - 6282 Series REAR CENTER HORIZONTAL INLET & VERTICAL OUTLET - 2 INTEGRAL VALVES - 25 PSIG - NO ATTACHED SWIVELS These bars are designed for use with natural, manufactured and L.P. gas only. Multiple Meter Application FNPT Insulated Endpiece 12.52” FNPT Rear Center Inlet Downstream Pressure Tap (Position C) Standard (black iron shown) FNPT x FNPT Union 8.
Bypass Meter Bars BYPASS YOUR TROUBLES. PBK - PORTABLE BYPASS KIT Bypass Meter Bars Looking for an alternative route to bypassing a gas meter set? Well, the hunt is over! With no reschedules, no loss of pilot lights, and no interruption of service, A.Y. McDonald’s Portable Bypass Kit was designed to bypass your troubles. At A.Y. McDonald, you aren’t just getting a product; you are getting an innovative solution, access to educational opportunities, and the ability to be treated like family.
Bypass Meter Bars Bypass Meter Bars Accessories 4-19 MORE THAN A BRAND. WE’RE A FAMILY. 800.292.2737 | sales@aymcdonald.com | aymcdonald.
Accessories Accessories METER NUTS Meter Nuts are used to connect straight and/or offset swivel gas fittings to the gas meter. Manufactured per ANSI B109.1. Black Part # 4815-671 4815-501 4815-507 4815-543 4815-513 4815-564 Galvanized Part # 4815-673 4815-517 4815-523 4815-557 4815-529 4815-574 Size 5LT 10LT 20LT 30LT 1A O EMCO Threads Per Inch 12 11 1/2 11 1/2 11 1/2 12 11 1/2 I.D. DIM. In Inches 0.880” 1.16” 1.42” 1.69” 1.34” 1.
Accessories Accessories NON-INSULATED SWIVELS - BLACK AND GALVANIZED Used with meter nuts to connect to gas meter. Manufactured per ANSI B109.1.
Accessories 3 Part Unions - 6300 Series FNPT OR MNPT INSULATED HEADPIECE - 150 PSIG Designed to prevent electrolysis or other corrosive action in 3/4" through 2" gas service lines. They are resistant to most chemical substances, including gas, water and petroleum oils at normal temperatures. Meets ANSI B1.20.1 standards.
Accessories Repair Unions FNPT OR MNPT INSULATED HEADPIECE - 150 PSIG Union Nut - Female 3/4” or 1” FNPT Outlet O-Ring (black iron shown) Insulated Endpiece 3/4” or 1” Union Nut 6276GR - DIMENSIONS 6300R - DIMENSIONS Insulated O-ring Outlet - Zinc Part # 4821-046 4821-026 Insulated O-ring Outlet Size 1” 1 1/4” Part # 4821-004 6300GR - DIMENSIONS 6301R - DIMENSIONS Insulated O-ring Outlet - Zinc Part # 4821-020 Size 3/4” Insulated Flat Gasket Outlet Size 3/4” Part # 4821-005 4821-013 Size
Notes 98 800.292.2737 | sales@aymcdonald.com | aymcdonald.
Notes 4-19 800.292.2737 | sales@aymcdonald.com | aymcdonald.
MORE THAN A BRAND. WE’RE A FAMILY. A.Y. McDonald Mfg. Co. is a leading manufacturer of Water Works, Plumbing, Pumps, and Natural Gas Products. The Company has distinguished itself with a proud tradition of quality and reliability since its founding in 1856. The mission of A.Y. McDonald Mfg. Co., in the words of our founder, is “to make good products and sell them honestly.
