User's Manual

15
iii. Connection to remote controller
Insert the 3.5mm audio jack connector of the supplied PPM cable to the training port
of remote controller and connect the six-pin connector of the PPM cable to the PPM
port of the ground unit.
Note:
(1) Turn off the embedded 2.4GHz radio of remote controller when use ground
unit’s uplink for RC communication.
iv. Setup Video Output
Ground unit has one way of outputting received video, to a PC.
 To view the video on PC
or Laptop, connect the ethernet port of the ground
unit to the
ethernet port of a PC or a Laptop.