Owner`s manual

5
Ayon Audio – Hart 18 – 8101 Gratkorn – Austria – Phone: [phone]
www.ayonaudio.com
Input Selector
Volum e
Stereo Integrated Amp
ayon
Mute
Line 1
Line 2
Line 3
USB
front panel
（1） volume control knob
（2） remote window
（3） mute LED indicator
（4） source selector knob with LED indicator
（5） headphone jack
（6） T/P changeover switch ( top-front view figure )
（7） vacuum tube socket ( top-front view figure )
（8） vacuum tube ( top-front view figure )
（9） power transformer – center ( top-front view figure)
（10）output transformer – left & right ( top-front view figure)
ACCESSORIES
Provided with the Ayon Orion amplifier are the following accessories:
4 x KT88 power tubes,
3 x 12AU7 signal - driver tubes,
1 x AC power cord,
1 x remote control,
1 x owner’s operating manual,
OPERATION
1. Installing the vacuum tubes
Please remove the vacuum tubes and the Orion from box and place the Orion on a firm, level
surface. Insert the vacuum tubes in accordance with the designated tube numbers into their
relative assigned sockets. Note: It is very important to insert the tubes in the correct location.
Important: Pay close attention to the direction of socket pins. If the direction is wrong and you
force the tube, damage to the socket pins will occur.
NEVER FORCE A VACUUM TUBE INTO PLACE. Tube should glide right in and have to fit tighten
(good pin contact). Ensure that all of the tubes are fully seated in their sockets.