Owner`s manual

11
Ayon Audio – Hart 18 – 8101 Gratkorn – Austria – Phone: [phone]
www.ayonaudio.com
SPECIFICATION
Amplifier Ayon Typhon
Class of Operation PPP-HC Triode, Class A
Tube Complement 4x 6C33*, 4 x 6H30
Load Impedance 4 & 8 Ohms
Negative Feedback 0dB
Bandwidth 10Hz-50kHz
Output Power 80 Watt
Peak Output Power 120 Watt
Input Impedance 100K Ohm
Input sensitivity for full power 730mV
Gain 30.8
S/N ratio at full power 0.4mV / 92 dB
Hum 0,003 V
Frequency Response 10 Hz - 45 kHz/ 0 dB
Distortion at 1W <
0,3%
Inputs RCA & XLR
Dimensions (WxDxH) cm 34x53x25 cm
Shipping dimensions (WxDxH) cm 71x52x44cm
Weight per unit 40kg
Shipping weight per unit 45kg
Specifications subject to change without notice
VACUUM TUBES
Ayon Audio strongly discourages changing tubes (tube rolling) for the purpose of “improving
sonic performance”. Tubes of the same part number from different manufacturer’s and lots
generally vary considerably in many operating parameters. The Typhon has been sonically and
precisely optimized for the tubes installed at the factory in Austria, by Ayon Audio. The 6C33
and 6H30 tubes are highly selected and matched tubes by our experts at Ayon Audio.
The original signal tubes will provide for many years of excellent audio performance.
Tube Life Expectancy
When tubes are new they are at slightly greater risk of going bad during there break in period.
This is called infant mortality. After the break in time period the tubes will stabilize and last for the
several thousand hours of operation unless traumatized by being jarred or dropped. For
maximum audio quality however we recommend replacing the tubes after 3000 – 5000 hrs of
operation.