A y r e V-1x Power Amplifier Owner’s Manual
Table of Contents Welcome to Installation and In Case of Numbers and Statement of A Place for Ayre 2 Operation 3 Trouble 7 Specifications 8 Warranty 9 Notes 11
Welcome to Ayre Please send in your warranty registration card so we can stay in contact with you. Page 2 Your Ayre V-1x offers a significant advance in the musical performance of audio power amplifiers. The warmth and immediacy of a live performance are apparent from the first listening. The combination of superb resolution and a natural, relaxed quality will draw you into the music, time and time again. This level of performance has been implemented using the highest level of workmanship and materials.
Installation and Operation The Ayre V-1x is easy to hook up and use. The following guidelines will ensure that the installation goes smoothly. Location Do not stack the Ayre V-1x directly with other components, as this may restrict the air flow or induce hum into the audio circuitry. The Ayre V-1x produces a moderate amount of heat during operation. ! It is important to maintain an adequate supply of air flow to avoid overheating the amplifier .
Inputs The input selector switch for one channel will be in the “up” position, while the other channel’s input selector switch will be in the “down” position. The power amplifier can be driven by a preamplifier or directly from a source (tuner, CD player, etc.) that has a level control. There are two sets of input connectors on the rear panel of the Ayre V-1x. The RCA jacks accept signals from unbalanced sources, while the XLR connectors are for balanced sources.
Operation The master power switch on the rear panel also incorporates a circuit breaker. There are two power switches on the Ayre V-1x. The master power switch on the rear panel is normally intended to be left on. The front-panel switch selects between the “Standby” and “Operate” modes. The Ayre V-1x features a sophisticated power monitoring system. When first plugged in to an AC power source, the front panel indicator light will glow red for approximately 90 seconds.
Should the AC line voltage drop below 80% of normal (brown-out), the unit will revert to “Warm-Up” mode and the indicator light will glow red. After the voltage returns to normal, the initial warm-up cycle will begin again. The Ayre V-1x also incorporates a sensor to detect the presence of DC at the output terminals. In this case, the amplifier reverts to “Warm-Up” mode, the indicator light glows red, and power is immediately removed from the output stage.
In Case of Trouble Should the Ayre V-1x amplifier ever fail to operate, please check the following: Is the unit in the “Operate” mode? The rear switch is the master power switch, and is normally intended to be left on. The front switch is the Standby/Operate switch. To operate the amplifier, the front panel indicator must be glowing blue. Are all of the connections to the amplifier secure? Check to see that the input and speaker connections on the rear of the V-1x are in place.
Numbers and Specifications Power Output Gain Input Impedance Power Consumption Dimensions Weight Page 8 200 watts per channel continuous into 8 ohms 400 watts per channel continuous into 4 ohms 26 dB 100 kΩ (per phase) 30 watts in standby mode 300 watts in operating mode, no signal 18" W x 18" D x 7" H (46cm x 36cm x 18cm) 95 pounds (43 kg)
Statement of Warranty Please take the time to fill out and return the enclosed warranty registration card. Your Ayre V-1x power amplifier is warranted against defects in workmanship and materials for a period of five years from the date of purchase. This warranty is transferable to subsequent purchasers within the original five-year period. All warranty claims must be made through an authorized Ayre dealer or distributor. Warranty Statement 1. Ayre Acoustics, Inc.
Ayre. Out-of-warranty claims will be billed for labor, materials, return freight, and insurance as required. Any product for which a warranty claim is accepted will be returned to the purchaser and the cost of shipping and insurance will be factory prepaid within the boundaries of the USA. Units to be shipped outside of the USA will be shipped freight collect only. 4.
A Place for Notes Page 11
Page 12 Rev 1.
Ayre Acoustics, Incorporated 2300-B Central Avenue Boulder, Colorado 80301 303 442.7300 www.ayre.
