Instructions / Assembly

10
ASSEMBLY INSTRUCTIONS
A dent ed, rusted or damaged propane cylinder may be
hazardous and should be checked by your cylinder
supplier. Never use a p ropane cylinder with a damaged
valve co nnection.
The propane cylinder must be constructed and ma rked
in accor dance with the specifications f or LP gas
cylinder s of the U.S. Department of Transportation
(DOT) or the standard f or cylinders, spheres and
tubes for transportation of dan gerous goods and
commission, CAN/CSA-B339.
The cylinder must have a listed overf illing prevention
device.
The cylinder must have a co nnection dev ice compat ible
with the connection for the appliance.
The cylinder used must include a collar to protect the
cylinder valve.
Never connect an unregulated propane cylinder to the
heater.
Attach r egulator to cylinder. Complete attachment.
Install cylinder.
Do not st ore a spare LP-gas cy linder under or near this appliance;
Never fill the cylinder beyond 80 percent f ull;
Place t he dust cap on the cy linder valve outlet whenever the cylinder is not
in use. Only install the type of dust cap on the cylinder valve that is provided with
the cylin der valve. Other type of caps or p lugs may result in leakage of propane .
ATTENTION This: P RODUCT IS NOT FOR COMMERCIAL USE INTENDED
FOR RESIDENTIAL USE ONLY.
Do not sit or stand on this table .
Keep children away during as sembly, This item contains small parts which can be
swallowe d by children.
Do not use indoors and inside any enclosure.
Retain the assembly instructions for future reference.
Installer ? Please leave these instructions with the owner.