Use and Care Manual

6
ASSEMBLY INSTRUCTIONS
Hardware Used
AA
BB
Hardware Used
EE
1
2
3
1. Attached a door handle (N) to one door (left) (M) with
two Φ4 washers (AA) and two M4 X 8 screws (BB).
Repeat procedure to complete the assembly of the other
door (right) (O).
2. Attach a angle iron (D) to 1/4 table (C) with M6 X 12
bolt (EE). Repeat procedure to complete the assembly of
the rest of three 1/4 tables.
3. Line up holes in 1/4 table with corresponding holes
the other 1/4 table, insert two M6 X 12 bolts (EE) through
holes, finger tighten two M6 nuts (DD) . Be sure that line
and line are in the same level and fully tighten
bolts. Use another two M6 X 12 bolts to fasten the two
1/4 tables. Repeat procedure to complete the assembly of
the rest of 1/4 tables.
x 4
Screw M4 X 8
Washer Φ4
x 4
x 4
Bolt M6 X 12
2
1
Hardware Used
EE
x 12
Bolt M6 X 12
DD
x 8
Nut M6
M
D
C
N
O