Use and Care Manual

ASSEMBLY INSTRUCTIONS
10 11
Hardware Used
5. Use Phillips screwdriver (OO) to secure
the top plate (D) to the upper supports (E)
with M5 x 12 mm screws (DD).
6. Connect upper supports (E) to the lower
supports (K) with M5 x 12 mm screws (DD)
and previously installed M5 x 12 mm screws
(DD) on control box assembly (I).
Tighten with Phillips screwdriver (OO).
M5 x 12 mm Screw
x 6
DD
Philips
Screwdriver
x 1
OO
5
6
Hardware Used
M5 x 12 mm Screw
x 3
DD
Philips
Screwdriver
x 1
OO
D
E
DD
H
I
DD
ASSEMBLY INSTRUCTIONS
Hardware Used
3. Use Phillips screwdriver (OO) to secure
the block belt (L) to the lower supports (K)
with M5 x 12 mm screws (DD).
4. Connect upper supports (E) to the lower
supports (K) with M5 x 12 mm screws (DD)
and previously installed M5 x 12 mm screws
(DD) on control box assembly (I).
Tighten with Phillips screwdriver (OO).
M5 x 12 mm Screw
x 4
DD
Philips
Screwdriver
x 1
OO
3
4
Hardware Used
M5 x 12 mm Screw
x 6
DD
Philips
Screwdriver
x 1
OO
L
E
K
I
DD
K