User Guide

commands.
From every other modes except
the EXEC and Privileged EXEC
modes, use the exit command.
Table 1 CLI Mode Information (continued)
CLI Command
Mode Prompt To Enter Mode To Exit Mode
INTERFACE MSR20
00(config-if-ethernet)#
From the CONFIGURATION
mode, use the interface
command.
BSS MSR2000(config-if-dot11radio-
bss)#
From the INTERFACE
mode, use the bss
command.
WDS MSR2000(config-if-dot11radio-
wds)#
MSR2000(config-if-dot11radio-
wds-auto)#
From the INTERFACE
mode, use the wds or wds
auto command.
STATION MSR2000(config-if-dot11radio-
sta)#
From the INTERFACE
mode, use the station
command.
IP NAT MSR2000(
config-nat)#
From the CONFIGURATION
mode, use the ip nat
command.
IP DHCP RELAY MSR2000(
config-dhcp-relay)#
From the CONFIGURATION
mode, use the ip dhcp
relay command.
IP DHCP SERVER MSR2000(
config-dhcp-server)#
From the CONFIGURATION
mode, use the ip dhcp
server command.
ROUTER AWR MSR2000(config-awr)# From the CONFIGURATION
mode, use the router awr
command.
SECURITY-
PROFILE
MSR2000(config-security-
profile)#
From the CONFIGURATION
mode, use the security-
profile command.
SERVICE
RECOVERY
MSR2000
(config-recovery)#
From the CONFIGURATION
mode, use the service
recovery command.
SERVICE RF-
MANAGEMENT
MSR2000(
config-rfm)#
From the CONFIGURATION
mode, use the service rf-
management command.
SERVICE
ROAMING-MOTRIX
MSR2000(config-roaming)# From the CONFIGURATION
mode, use the service
roaming-motrix command.
QOS MSR2000(config-qos)# From the CONFIGURATION
mode, use the qos
command.
CLASS MSR2000(config-qos-class)# From the CONFIGURATION
mode, use the class
<name> command.
Use the exit
commands to
return to
CONFIGURATION
mode, except of
bss, wds, station
and class
Use the end to
return to Privileged
EXEC mode.
MSR2000 CLI Configuration Guide
11