User Guide

CTRL-N
Return to more recent commands in the history buffer after recalling commands with
CRTL-P or the up arrow key.
CTRL-P
Recalls commands, beginning with the last command.
CTRL-U
Deletes the line.
CTRL-W
Deletes the previous word.
CTRL-Z
Ends continuous scrolling of command output.
Esc B
Moves the cursor back one word.
Esc F
Moves the cursor forward one word.
Esc D
Deletes all characters form the cursor to the end of the word.
Basic Configuration Information
This section provides information to configure your system to access the network or
enable other hosts in your network after the initial system boot. Detailed feature or
protocol configuration information is provided in subsequent chapters.
• System Information
• Host name configuration
• Password configuration
• Viewing configuration file information
• Setting CONFIGURATION mode parameters
System Information
When booting up the MSR2000, the system configuration program is not implemented
automatically, user has to configure MSR2000 by using CLI commands to enable and
manage the system.
Table 4 System Information for Initial Setup
System Information Purpose
Hostname Allows you to set the host name of the MSR2000. Enter a
new host name in the form of an alphanumeric string.
Router-password Default password is public, it can be change by using this
CLI command
Management port IP
address
By default, IP address 192.168.0.1/24 is configured on
FastEthernet 0, user can change it if need.
Node-id and router-id Default node-id is 1 and router-id is 192.168.10.1; these
must be set such that they are unique in a single MSR2000
mesh network.
Host Name Configuration
The host name appears in the prompt. The default host name is MSR2000. Names must
start with a letter and end with a letter or digit. Characters within the string can be letters,
digits, and hyphens.
MSR2000 CLI Configuration Guide
15