User Guide

To configure a host name, use the following command in the CONFIGUREATION mode:
Table 5 Configuring a host name
Command Syntax Command Mode Purpose
hostname <name>
no hostname
CONFIGURATION Allows you to set the host name of the MSR2000.
Enter a new host name in the form of an
alphanumeric string.
Remove the hostname, it goes back to default.
Default hostname = MSR2000
Password Configuration
MSR2000 has a default password configured, the default password is public.
To configure the login password, configure the following command in the Privileged
EXEC mode.
Table 6 Configuring login password
Command Syntax Command Mode Purpose
router-password root Privileged EXEC Change the login password for the user
root command.
MSR2000# router-password
root Set login password for root
MSR2000# router-password root
Changing password for root
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password:
Re-enter new password:
Password changed.
Viewing Configuration File Information
Azalea Networks recommends that you save your configuration often.
To save a configuration file, use either of the following commands in the Privileged
EXEC mode:
Table 7 Save the running configuration to startup configuration
Command Syntax Command Mode Purpose
copy running-config startup-
config
Privileged EXEC Save the current running configuration to
the startup-config file.
write memory Privileged EXEC Save the current running configuration to
the startup-config file. (old way to save
configuration)
MSR2000 CLI Configuration Guide
16