User Guide

Viewing the dot11radio interface information
The “show run” command displays the intended configuration of the dot11radio interface,
while the “show interface dot11radio” command displays the current state of the
interface.
MSR2000# show run
...
!
interface dot11radio 0
wireless-mode a 48 US
mode backhaul
max-auto-wds 5
wds-unicast-rate 60
!
...
MSR2000# show interface dot11radio 1
Interface Dot11Radio0
operation_mode:backhaul, country code:US, channel policy:0, antenna:0,
cts protection:0, max auto wds:5,
admin status: up physical status: up
index 3 metric 1 mtu 1500 <UP,BROADCAST,RUNNING,MULTICAST>
HWmode: a, channel: 48, Fragment thr: 2346, RTS thr: 2347
HWaddr: 00:0b:6b:35:e8:5d
input packets 2683950, bytes 175569398, dropped 0, multicast packets 0
input errors 34844, length 0, overrun 0, CRC 0, frame 0, fifo 0, missed 0
output packets 115532, bytes 11644226, dropped 0
output errors 2, aborted 0, carrier 0, fifo 0, heartbeat 0, window 0
collisions 0
Figure 9 Output of dot11radio interface
MSR2000 CLI Configuration Guide
27