User Guide

mac-address accept-all
no mac-address
all other clients.
Restore to default configuration
(accept all MAC addresses)
ignore-broadcast-ssid
no ignore-broadcast-ssid
INTERFACE
DOT11RADIO BSS
Disable broadcasting of this BSS’s
SSID
Enable broadcasting of this BSS’s
SSID (Default)
max-rate <rate>
no max-rate
INTERFACE
DOT11RADIO BSS
Select the maximum allowed
transmission rate for this BSS in units
of 100kbps.
Available rates: 10, 20, 55, 110, 60,
90, 120, 180, 240, 360, 480, 540.
Allow the maximum transmission rate
supported by the client and radio
hardware (Default)
max-station-allowed <0-240>
max-station-allowed 240
no max-station-allowed
INTERFACE
DOT11RADIO BSS
Configure the maximum number of
stations allowed to associate with this
BSS at the same time.
Allow up to 240 stations to associate
with this BSS at the same time
(default).
station-inactivity-limit <1-65535>
station-inactivity-limit 300
no station-inactivity-limit
BSS Configure the maximum amount of
time (in seconds) a station is allowed
to be inactive before the action
specified by the inactivity-policy (see
next) is taken
Set the inactivity limit to the default
value of 300 seconds
station-inactivity-policy <0-1>
station-inactivity-policy 0
no station-inactivity-policy
station-inactivity-policy 1
INTERFACE
DOT11RADIO BSS
Configure the action taken when a
station exceeds the inactivity limit.
Poll the station and de-authenticate
station if it does not respond (default)
De-authenticate station immediately
unicast-rate <rate> INTERFACE
DOT11RADIO BSS
Set the unicast rate of this BSS; once
set, the radio interface will attempt to
consistently use the specified
transmission rate for stations
associated with this BSS. Setting this
option will also prevent stations that
do not support the specified rate from
associating with the BSS.
MSR2000 CLI Configuration Guide
32