User Guide

no unicast-rate
The rate is specified in units of
100kbps; the available rates are: 10,
20, 55, 110, 60, 90, 120, 180, 240,
360, 480, 540
Disables unicast rate setting for this
BSS; radio interfaces will
automatically select transmission
rates (default setting)
802.11 Security Configuration
The 802.11 security standard defines a suite of wireless security protocols and
implementations. It provides open and shared key authentication, is compatible with
WPA /WPA2, and interoperates with 802.1x.
The MSR2000 allows each BSS to use a different 802.11 security profile. For more
information regarding 802.11 security, please refer to Chapter 11.
Viewing BSS of dot11radio interface information.
MSR2000# show run
...
!
interface dot11radio 0
...
bss azalea_demo
station-inactivity-policy 1
station-inactivity-limit 300
max-rate 60
authentication open wep test-supplicant default-key 1
mac-address accept AAA
...
!
security-profile wep test-supplicant
wep-key 1 1234567890
wep-key 2 2345678901
wep-key 3 3456789012
wep-key 4 4567890123
!
mac-list AAA
mac-addr 22:22:22:bc:22:44
mac-addr 22:22:22:bc:22:45
mac-addr 22:22:22:bc:22:08
...
!
MSR2000# show interface dot11radio 0 bss azalea_demo
BSS:azalea_demo
ignore broadcast ssid:0, maxium station allowed:240,
transmission fail percentage:0, transmission fail check interval:0,
station inactivity policy:1, station inactivity limit:300,
maxium rate control rate:60, authentication:open wep test-supplicant
default-key 1,mac authentication:accept AAA,
HWaddr: 00:17:7b:18:18:40
MSR2000 CLI Configuration Guide
33