User Guide

no pool [NAME] Remove an existing DHCP pool
NAME: An alphanumeric string that
identifies the DHCP pool
domain-name [name]
no domain-name
IP DHCP
SERVER POOL
Set the domain name to be included in
DHCP leases for this pool
Do not include any domain name
information in DHCP leases for this pool
name: A domain name such as
“azaleanet.com”
gateway <A.B.C.D>
no gateway <A.B.C.D>
IP DHCP
SERVER POOL
Set the gateway IP to be included in
DHCP leases for this pool
Do not include gateway in DHCP leases
A.B.C.D: A gateway IP address that
should conform to a IPv4 unicast address,
where A is 1-223, B & C is 0-254, and D
is 1-254.
host <HH:HH:HH:HH:HH:HH>
<A.B.C.D>
no host <HH:HH:HH:HH:HH:HH>
IP DHCP SERVER
POOL
Add a fixed DHCP IP address entry for a
client host
Remove a fixed DHCP IP address entry
HH:HH:HH:HH:HH:HH: MAC address of
the client host
A.B.C.D: Fixed IP address to be assigned
to the host
network {<A.B.C.D Mask> |
<A.B.C.D/M>}
IP DHCP SERVER
POOL
Specify the subnet that this pool belongs
to
<A.B.C.D Mask>: Address and mask of
the subnet, e.g. 10.1.1.0 255.255.255.0
A.B.C.D/M: Address/mask of the subnet,
e.g. 10.1.1.0/24
range <begin IP> <end IP>
no range <begin IP> <end IP>
IP DHCP SERVER
POOL
Add a range of IP addresses to this
DHCP pool
Remove a range from this DHCP pool
Begin IP: The first IP address of the range
End IP: The last IP address of the range.
MSR2000 CLI Configuration Guide
52