User Guide

Security-Profile Configuration
This section describes the authentication types and encryption methods that you can
configure on the router. Security profile on MSR defines all security policy supported by
router software. Now router supports WEP, WPA, WPA2 and 8021X security suites. This
block is only a definition of security policy, and it will take effect after attached in BSS or
WDS. You can add multi profile for the same methods, and that will be flexible to change
security policy on router for user.
Table 28 Configuring Security Profiles
Command Syntax Command Mode Purpose
security-profile wep <wep-profile-name>
no security-profile wep <wep-name>
CONFIGURATION Create or modify a WEP
security profile of the given
name
Remove a WEP profile
wep-key <1|2|3|4> <key-string>
no wep-key <1|2|3|4>
SECURITY-
PROFILE WEP
Add a WEP key to the WEP
profile
Remove a WEP key from WEP
profile
security-profile wpa <wpa-profile-name>
no security-profile wpa <wpa-profile-name>
CONFIGURATION Create or modify a WPA
security profile of the given
name
Remove a WPA profile
encryption-mode-cipher tkip
no encryption-mode-cipher
SECURITY-
PROFILE WPA
Enable TKIP encryption mode
for WPA
wpa-type 8021x <8021x-profile-name>
no wpa-type 8021x
SECURITY-
PROFILE WPA
Enable 8021X authentication for
WPA profile
Remove 8021X authentication
on WPA profile
wpa-type psk hex <string>
wpa-type psk ascii <string>
no wpa-type psk
SECURITY-
PROFILE WPA
Enable WPA PSK
authentication on WPA profile
and configure pre-shared key
using hexadecimal format.
Enable WPA PSK and configure
pre-shared key using ASCII
format
Remove WPA PSK
authentication from WPA profile
MSR2000 CLI Configuration Guide
60