User Guide

security-profile 8021x 8021xprofile
eap-reauth-period 3600
security-profile 8021x 8021x1
MSR2000#
BSS Security Configuration
This section describes how to apply security profiles and MAC lists to the router’s BSS
configurations.
Table 30 Configuring BSS Security
Command Syntax Command Mode Purpose
authentication open
no authentication
authentication open wep <wep-profile-
name> default-key <1-4>
authentication open key-management
wpa <wpa-profile-name>
authentication open key-management
wpa2 <wpa2-profile-name>
authentication shared wep
<wep-profile-name> default-key <1-4>
INTERFACE
DOT11RADIO BSS
Allow all clients to associate with
this BSS
Enable WEP encryption for this
BSS using the key settings in the
WEP profile and the specified
default key
Enable WPA security for this BSS;
only allow clients with correct WPA
authentication and encryption
settings to associate with this BSS.
Enable WPA2 security for this
BSS; only allow clients with correct
WPA2 authentication and
encryption settings to associate
with this BSS.
Enable WEP authentication and
encryption for this BSS using the
key settings in the WEP profile and
the specified default key
mac-address accept <mac-list-name>
mac-address deny <mac-list-name>
mac-address accept-all
no mac-address
INTERFACE
DOT11RADIO BSS
Only accept clients with MAC
addresses in the specified list;
deny all other clients
Only deny clients with MAC
addresses in the specified list;
allow all other clients.
Restore to default configuration
(accept all MAC addresses)
Table Display security configuration on BSS
MSR2000 CLI Configuration Guide
63