User Guide

When you login, you are in the User EXEC mode where you can enter a limited number
of commands, mostly show commands. In this mode, you can not make or change any
configuration. You can only view system information or execute limited commands. In
EXEC mode, the enable command prompts you for your password to allow you into
Privileged EXEC mode.
Privileged EXEC mode has commands to view configuration, manage configuration
files, run diagnostics, enable or disable debug operations, reboot the router. By default,
the privilege level is 15. To configure Azalea MSR2000, use the configure terminal
command to enter the CONFIGURATION mode.
CONFIGURATION mode enables you to configure security features, setup various
service and SNMP functions, configure static route, and you can enter protocol,
interfaces, and line CLI modes to configure setting, and save the configuration.
INTERFACE mode enables you to configure layer 2 and layer 2 protocols and IP
services specific to that interface only.
IP DHCP RELAY mode enables you to configure DHCP RELAY globally for the Azalea
MSR2000. You may configure multiple DHCP Servers by IP addresses.
IP DHCP SERVER mode enables you to configure DHCP SERVER globally for Azalea
MSR2000. You may configure the DNS, Domain name, lease time.
IP NAT mode enables you to configure NAT globally for Azalea MSR2000. You may
configure NAT the out interface associated with the physical interface.
ROUTER AWR mode enables you to configure the Adaptive Wireless Routing (AWR)
protocol. You may enable or disable the protocol.
SECURITY PROFILE mode enables you to configure the SECURITY profile globally for
Azalea MSR2000. You may configure 802.1X, WEP, WPA, WPA2 profile.
SERVICE RECOVERY mode enables RECOVRY globally for Azalea MSR2000. You
may configure portal IP address.
SERVICE ROAMING-MOTRIX mode enables you to configure MOTRIX globally for
Azalea MSR2000. You may configure MAC, IP, and IAPP settings.
SERVICE RF-MANAGEMENT mode enables you to configure RFM globally for Azalea
MSR2000. You may configure debug level.
QOS mode enables you to configure QOS globally for Azalea MSR2000. You may
configure multiple classes and define maximum and minimum bandwidth for each class.
* PASSWORD FUNCTION IS RESERVED FOR NEXT RELEASE
MSR2000 CLI Configuration Guide
9