User's Manual Part 2

Command Syntax Command Mode Purpose
show log rf-management Privileged EXEC Display the debug log of RFM (see
debug command above)
show rf-management active-
neighbors
Privileged EXEC Display a list of neighboring MSR2000
routers and radios discovered by RFM
show rf-management interface Privileged EXEC Display a list of WDS interfaces
currently monitored by RFM; may
include both auto and manual WDS
interfaces.
show rf-management
configuration
Privileged EXEC Display the current configuration
parameters of RFM
Viewing rf-management information.
MSR2000# show rf-management active-neighbors
RF Management active neighbor table:
RFM has 2 active radio interfaces, 2 total WDS interfaces
Dot11Radio0 has 1 active neighbors:
Ngh 1: Mac: 00:00:00:00:00:00 Learned: No
IP: 10.140.141.1, node_id: 0, radio_idx: 0
local WDS if: Radio0MWds0, local IP: 10.140.141.2
admin: Up, physical: Down, state: Initial, flag: 0x13
phytype: IEEE 802.11a, ch: 161, mode: WDS
link quality: 0%, rssi: 0, snr: 0
Dot11Radio1 has 1 active neighbors:
Ngh 1: Mac: 00:0b:6b:36:a3:5b Learned: No
IP: 10.141.143.2, node_id: 143, radio_idx: 0
local WDS if: Radio1MWds0, local IP: 10.141.143.1
admin: Up, physical: Up, state: Established, flag: 0x13
phytype: IEEE 802.11a, ch: 52, mode: WDS
link quality: 86%, rssi: 69, snr: 69
MSR2000# show rf-management interface
RF Management WDS Interfaces:
Radio0MWds0: Radio: Dot11Radio0, NID: 141
Admin status: Up, Physical status: Down
IP: 10.140.141.2, Netmask: 255.255.255.0, Bcast: 10.140.141.255
Ngh MAC: 00:00:00:00:00:00, Ngh NID: 0, Ngh Radio_idx: 0
Ngh IP: 10.140.141.1, Netmask: 255.255.255.0, Bcast: 10.140.141.255
Link State: Initial, Linke quality: 93%
RSSI: 0, SNR: 0
Radio1MWds0: Radio: Dot11Radio1, NID: 141
Admin status: Up, Physical status: Up
IP: 10.141.143.1, Netmask: 255.255.255.0, Bcast: 10.141.143.255
Ngh MAC: 00:0b:6b:36:a3:5b, Ngh NID: 143, Ngh Radio_idx: 0
Ngh IP: 10.141.143.2, Netmask: 255.255.255.0, Bcast: 10.141.143.255
Link State: Established, Linke quality: 86%
RSSI: 69, SNR: 69
Figure 13 Output of Rf-management
MSR2000 CLI Configuration Guide
41