User's Manual
Table Of Contents
- 1 MSR4K44S Quick Installation Guide
- 2 Abstract
- 2.1 Function Introduction
- 2.2 Appearance and Interfaces
- 2.3 Operating Range
- 2.4 Environmental Rating
- 2.5 LED Panel
- 2.6 Ethernet Cable
- 2.7 Console Cable
- 2.8 Power Cable
- 2.9 Screws
- 3 Installation Preparation
- 4 Antenna Installation
- 5 MSR4K44S Installation
- 6 Lightning Protection Installation
- 7 Feeder Installation
- 8 Ethernet Cable Installation
- Power Cord Installation
- 10 Completed Installation
- 11 Administrating the MSR4K44S
- Appendix
AZALEA MSR4K44S INSTALLATION GUIDE
COPYRIGHT 2007 AZALEA NETWORKS
15
Spectrum measurement is to get familiar with radio environment in the
target coverage area and antennas. The interference could from Wi-Fi APs
and other systems.
¾ Site investgation: the availabity of power, installation of antenna and
MSR4K44S.
3.5 Tools
D Safety tape, safety cap
D Insulation tool
D Installation Tool
D Measurement Tool
D Power Panel
D Template of Installation
3.6 Security Check Before Start
D Check mast installation, the material of pole and its installation should comply
related installation specification(Pole should be vertical, and grounding should be
done, the diameter is around 40－60mm;
D Grounding is prepared already;
D Check the distance between MSR4K44S and Grounding point;
D If cabling need to go through wall or ceiling;
D Special installation material or tools are needed or not.
3.7 Equipment Check
D Check the integration of equipment list in the package;
D Check the integration of antenna, feeders and installation packages;
D Check the preparation of Adhesive Tape, PVC tape and strap to be enough for
installation;