User's Manual
Table Of Contents
- 1 MSR4K44S Quick Installation Guide
- 2 Abstract
- 2.1 Function Introduction
- 2.2 Appearance and Interfaces
- 2.3 Operating Range
- 2.4 Environmental Rating
- 2.5 LED Panel
- 2.6 Ethernet Cable
- 2.7 Console Cable
- 2.8 Power Cable
- 2.9 Screws
- 3 Installation Preparation
- 4 Antenna Installation
- 5 MSR4K44S Installation
- 6 Lightning Protection Installation
- 7 Feeder Installation
- 8 Ethernet Cable Installation
- Power Cord Installation
- 10 Completed Installation
- 11 Administrating the MSR4K44S
- Appendix
AZALEA MSR4K44S INSTALLATION GUIDE
COPYRIGHT 2007 AZALEA NETWORKS
19
4.3 Omni Antenna Installation
Tools:
Adjustable Spanner
Installation material package of omni antenna includes:
D Omni antenna:
D Installation bracket of omni antenna( 2 sets of fasten nuts included)
The procedure of omni antenna installation is:
1． Mount the bracket to pole by one set of nuts, fasten the nuts by Spanner;
2． Mount the omni antenna to the bracket by another set of nuts;
3． Adjust antenna to secure it installed vertically;
4． Fasten the nuts by Spanner.
Safety protection must be guaranteed when aloft work
The installation should be done by experienced antenna installer. Power
line and high electric field must be avoided.
Don’t stand on side of antenna of MSR4K44S when MSR4K44S is
operating, there are strong electromagnetic field surrounding the antenna
Don’t do any installation works during raining time.