User's Manual
Table Of Contents
- 1 MSR4K44S Quick Installation Guide
- 2 Abstract
- 2.1 Function Introduction
- 2.2 Appearance and Interfaces
- 2.3 Operating Range
- 2.4 Environmental Rating
- 2.5 LED Panel
- 2.6 Ethernet Cable
- 2.7 Console Cable
- 2.8 Power Cable
- 2.9 Screws
- 3 Installation Preparation
- 4 Antenna Installation
- 5 MSR4K44S Installation
- 6 Lightning Protection Installation
- 7 Feeder Installation
- 8 Ethernet Cable Installation
- Power Cord Installation
- 10 Completed Installation
- 11 Administrating the MSR4K44S
- Appendix
AZALEA MSR4K44S INSTALLATION GUIDE
COPYRIGHT 2007 AZALEA NETWORKS
20
5 MSR4K44S Installation
Installation kit
D 1 Solar shield
D 4 shield fastening bolts
D 1 Installation Bracket
D 2 pipe holders (mounted on pole)
D 4 long bolts for pipe holder
D 4 expansion bolts ( mounted on wall)
D 2 MSR4K44S Fastening bolts
5.1 Install MSR4K44S on Mast
Tools: Spanners size 10 and 14.
Installation Procedure
1. use long bolts to fasten the pipe holder and bracket to the mast
2. use 2 MSR4K44S fastening bolts to mount the MSR box to the bracket
3. use the 4 shied bolts to mount solar shield to MSR400
And MSR4K44S could also be mounted on horizon pole by mounting bracket equipped.
5.2 Mounting MSR onto wall
Tools needed: Mark pen, Percussion drill,
Percussion Drill Hammer, and adjustable Spanner.
Mounting
Bracket
M4×16 screw
(For hanging unit on
mounting bracket
Mounting
screw
U type
holder