User's Manual
Table Of Contents
- 1 MSR4K44S Quick Installation Guide
- 2 Abstract
- 2.1 Function Introduction
- 2.2 Appearance and Interfaces
- 2.3 Operating Range
- 2.4 Environmental Rating
- 2.5 LED Panel
- 2.6 Ethernet Cable
- 2.7 Console Cable
- 2.8 Power Cable
- 2.9 Screws
- 3 Installation Preparation
- 4 Antenna Installation
- 5 MSR4K44S Installation
- 6 Lightning Protection Installation
- 7 Feeder Installation
- 8 Ethernet Cable Installation
- Power Cord Installation
- 10 Completed Installation
- 11 Administrating the MSR4K44S
- Appendix
AZALEA MSR4K44S INSTALLATION GUIDE
COPYRIGHT 2007 AZALEA NETWORKS
4
Safety Warnings
MSR4K44S must be installed by trained professional installation technician. All below
warning information must be read before installation.
General Safety Warnings
You can be killed or injured if performing antenna installation near electrical
power lines. Carefully read and follow all instructions in this guide. Please be sure there
are no high voltage and electronic field.
Working aloft Warning
When work on tower or roof, the person on high place must wear safety belt, All
the tools he take up must be tied to waist or shoulder. The people below must wear safety
helmet.
Lightning Activity Warning
Make sure not to connect or disconnect cables during periods of lightning
activity.
A surge protective device should be installed to prevent potential damage from very high
surges, for instance, the peak surges caused by lightning.
Explosive Device Proximity Warning
Do not operate wireless network device close to explosive merchandise or
environment, for example, a vicinity to a gas station.
Antenna Placement Warning
Do not install any antenna near overhead power lines or other electric light, or
where the antenna can come into contact with such circuits. When installing antennas,