AZBox Premium HD+ User Manual High Definition Digital Satellite Receiver Personal Video Recorder 1
Danger DANGER indicates an immediate hazardous situation which, if not avoided, will result in death or serious injury. Do not attempt to modify this receiver in any way. To do so may result in fire, injury, electronic shock or severe damage to you or your receiver. Internal inspection, maintenance and repairs should only be carried out by your dealer or OpenSAT. Please do not use this receiver in close proximity to flammable or explosive gases, as this could increase the risk of explosion.
Warning Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. (a) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. (b) The mains plug, which is used as a disconnect device, shall remain readily operable.
Caution (a) Always follow these instructions to avoid the risk of injury to yourself or damage to your equipment. (b) Unplug the receiver from the AC power outlet before cleaning. Use only a damp cloth for cleaning the exterior of the receiver. (c) Do not use accessories or attachments not recommended by the receiver manufacturer, as they may cause hazards and will void the warranty. (d) Do not operate the receiver in high-humidity areas, or expose it to water or moisture.
(h) Operate the receiver using only the type of power source indicated on the marking label. Unplug the receiver power cord by gripping the power plug, not the cord. (i) Route power supply cords so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. (j) Use an outlet that contains surge suppression or ground fault protection.
Safety Precautions Please read carefully the following safety precautions. ① The mains power must be 90 to 250 volts. Check it before connecting the digital receiver to the mains socket. For the power consumption of the digital receiver, see 6.1. ② The mains socket should be near the equipment. Do not run an extension lead to the unit. ③ Do not expose the digital receiver to any moisture. The digital receiver is designed for use indoors only. Use dry cloth when cleaning the digital receiver.
Additional Remarks This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.
Contents Table of Contents 1. Introduction ......................................................................................................................................... 12 1. 1 Features ........................................................................................................................................................12 1.2 Package Contents .....................................................................................................................................
3.4.3. 3.4.4. 3.4.5. Timer Cycle ..........................................................................................................................................47 Timer Service .......................................................................................................................................47 Time .....................................................................................................................................................47 3.5. Internet .............
3.11. 4. GOGO-list .................................................................................................................................................74 Main Menu ............................................................................................................................................ 75 4.1. TV .................................................................................................................................................................76 4.1.1.
Introduction 5.2.1. 5.2.2. 6. Windows XP .....................................................................................................................................109 Windows Vista .................................................................................................................................109 Product specifications / Warranty ............................................................................................... 111 6.1. Product specifications ...................
1 Introduction 1. Introduction The AZBox Premium HD+ digital receiver is fully compliant with the international Digital Video Broadcasting (DVB) standard, and thus is able to receive digital broadcasts of that standard. For its operation you need an antenna, which must be installed appropriately. NOTE In general we equate a channel with a frequency.
scheduled programs. ⑦ You can record one service while you are currently watching another. ⑧ The large storage capacity of the hard disk drive allows you to record up to about 60 hours of television —in case of 250 gigabytes— in excellent picture and sound quality. ⑨ Time shift is a special technical feature available on the AZBox Premium HD+ (PVR). You can pause the program you are watching and resume it again at a later time.
1 Introduction 1.2 Package Contents Before going any further, check that you have received the following items with your digital receiver. • • • • • • • • AZBox Premium HD+ Remote control unit Two batteries for the remote control (AAA 1.5V) One power adaptor One power cable One SATA cable User Guide CD Four Screw bolts for 2.5” & 3.5” HDD NOTE: Accessories may vary according to your local area.
1 Introduction 1.3. The front panel The front panel of the AZBox Premium HD+ has buttons to perform basic functions such as changing channels, adjusting volume, and powering on and off, as well as specific LEDs and a display to indicate its status. The following indicates what they mean. 1, 2 and 3 4 5 6 7 8 9 11 10 10 9 ① One SMART CARD Slot: Support electronic commerce using a smart card. ② Two CI CARD Slots: Connect to support devices. ③ USB Slot: Connect to support devices.
1 Introduction ⑤ Power button: Switch the digital receiver between stand-by mode and operation mode. To reboot the receiver, press this button for 3 seconds. ⑥ MENU button: Enter the detail menu. ⑦ EXIT button: Exit menus, EPG (Electronic Program Guide), and program information. ⑧ Home button: Enter the main menu. ⑨ VOLUME +/- buttons: Increase or decrease the volume. ⑩ CHANNEL ∧/∨ buttons: Switch to previous or next service. They are also used to navigate around menu screens.
1 Introduction Introduction 1.4. The Rear Panel The AZBox Premium HD+ has a wide range of connections on the back. Check what connections your television set has in comparison with the digital receiver. The following indicates what they mean. 1 2 3 4 5 7 10 6 8 9 11 12 13 14 ① POWER SWITCH: Turn the digital receiver On and OFF. ② AC POWER INPUT: Connect AC power cord to deliver power to the digital receiver. ③ FAN ④ HDMI: Audio and video output socket for the high definition television set.
(green/blue/red) ⑩ VIDEO: Composite video output socket for the television set. (yellow) ⑪ AUDIO L/R: Stereo audio output socket for the television set or the audio system. (white/red) ⑫ SCART TV: Audio and video output socket for the television set. ⑬ TUNER 1: with input and output socket. ⑭ TUNER 2: with input and output socket. Table 1.
1 Introduction 1.5.
1 Introduction Numbers from 1 to 5 are for TV control buttons. 1) TV/AUX ( ): Switch to antenna/cable bypass input signal. 2) TV VOL +/- ( 3) TV CH ∧/∨ ( 4) TV Power ( ): Turn TV on and off. 5) TV MUTE( ): Mute the TV sound. Press again to switch it ): Increase or decrease TV volume. ): Change the channels up and down. back. 6) STB Power ( ): Put the STB into standby or operation mode. To reboot the receiver, press this button for 3 seconds.
1 Introduction 16) MENU ( ): Display the Detail Menu. 17) CHECK ( ): Check the selected option. 18) GUIDE ( ): Display the EPG (Eletronic Program Guide). 19) EXIT ( ): Exit menus, EPG (Eletronic Program Guide) and program information. 20) Navigation buttons ( ): Move the cursor around menu screens. 21) OK ( ): Determine your selection or display channel selection. 22) TV/RADIO ( ): Switch between TV services and radio services.
1 Introduction 32) NUMERIC BUTTONS (0~9): Input channel numbers, passwords, on-screen keyboard and to set time. 33) DEL/BACK ( ): Delete or move your cursor one step back. 34) CAPS/NUM ( ): Switch the number buttons to lower, upper case letters or back to numbers. 1.5.1. STB Code output Format (Varied NEC protocol) ① uPD6121 base, wordtime = 109.5msec output.
1 Introduction ① Press TV/AUX( ) + OK( ) buttons for 3 seconds, then the TV Power( ) button will turns on. ② With the TV Power( ) button turns on, press the or button until TV turns off. ③ After TV turned off, press the OK( ) button. ④ The TV Power( ) button will blinks three times, and configuration is done. 1.5.1.2 TV configuration number search (ID Recall) ① Press TV/AUX( ) + OK( ) buttons for 3 seconds, Then the TV Power( ) button will turns on.
1 Introduction 1.6 CI (Common Interface) Some broadcasts are scrambled so that only paid subscribers can enjoy them. Scrambled services can only be viewed with a Conditional Access Module (CAM) and a subscription card belonging with the scrambling system. Common Interface (CI) is the slot on a digital receiver into which a conditional access module may be inserted. The front of the digital receiver has two common interfaces. 1.6.
1 Introduction To view the information about the module and subscription card which is inserted into the digital receiver, press the Menu( ) button. You should see a screen like picture above.
2 Installations 2 Installations There are several ways to set up the digital receiver. Set up the digital receiver suitably to your television and other appliances. If you have any problem with your setup or need help, contact your dealer. 2.1. Connections to antenna Whatever sort of connection you have between the digital receiver and the television, you need to connect the digital receiver to your television antenna so that it can receive digital television services.
2 Installations 2.2. Connections to TV Between all the following connectors of the digital receiver, we recommend you to use the first connector to get best picture quality. If your television does not have the matching connector, then use the next connector in the following order for better picture quality. 1. HDMI connector (HDMI) 2. SCART connector (TV) 3. Component connector (YCbCr) 4. Composite connector (VIDEO) 5.
2 Installations 2.2.1. HDMI connector If you have a high definition television set, you should use a HDMI cable for best results. Plug one end of the cable into the HDMI socket on the digital receiver, and plug the other end into the matching socket on your television. In this case, you do not have to make audio connection because the HDMI connector can output stereo audio or Dolby digital audio. NOTE HDMI connector does not support 480i resolution.
2 Installations 2.2.2. SCART connector For best results with a standard television set, you should use a SCART cable. Plug one end of the cable into the TV socket on the digital receiver, and plug the other end into a free SCART socket on your television. Some televisions have inputs via S-Video or Component connectors rather than SCART. If you have such a television, use an appropriate conversion cable to link the TV socket on the digital receiver to the matching socket on your television.
2 Installations 2.2.3. Component video connector You need to obtain a component video cable (RCA cable) to use the component video connector. Plug one ends of the cable into the Y(green), Cb(blue) and Cr(red) sockets on the digital receiver, and plug the other ends into the matching sockets on your television.
2 Installations 2.2.4. Composite video connector You need to obtain a composite video cable(RCA cable) to use the composite video connector. Plug one end of the cable into the VIDEO(yellow) socket on the digital receiver, and plug the other end into the matching socket on your television. NOTE You cannot view high definition video with the composite video connector.
2 Installations 2.2.5. Audio connection You need to obtain an audio cable (RCA cable) to connect the audio connectors. Plug one end of the cable into the AUDIO L (white) and AUDIO R (red) sockets on the digital receiver, and plug the other end into the matching sockets on your television or audio system.
2 Installations cable. Plug one end of the cable into the S/PDIF socket on the digital receiver, and plug the other end into the matching socket on your audio system. 2.3. Installing batteries To install batteries in the remote control, perform the following steps: 1. Take off the battery cover from back of the remote control. 2. Install two AAA batteries, follow the instruction described in the container and make sure the polarity (+ / -) direction is correct. 3. Put on the battery cover back.
2 Installations 2.4. Powering on for the first time [AZBox Premium HD+] Now that you have your digital receiver connected, you should plug it into a mains socket and turn on the Power Switch at the backside. The front panel indicator will be lit blue.
NOTE - Your receiver, as any electronic equipment, is power consuming. In order to reduce power consumption, please switch your receiver to standby whenever you are not using it. - For saving energy compared to the stand by mode, if you are not using your receiver for a longer period of time, we recommend to switch off the receiver by unplugging it from the mains. 2.4.1. Powering on and checking picture After a few seconds you may see a picture displaying a menu.
2 Installations 2.5. Firmware Update The digital receiver has a stable and convenient firmware to use. However, once in a while a new firmware may be released to improve the digital receiver. 2.5.1. Checking the firmware information You have to check up the firmware information of your digital receiver before downloading a new firmware. Select the Settings > System Information menu.
2 Installations NOTE The version of firmware is always the latest version when you purchase the digital receiver. 2.5.1.1. Internet You can update the firmware through the Internet. Make sure that the digital receiver is connected to the internet before running the firmware upgrade. Press the OK ( ) button, and the Update List will be shown. If your firmware is the latest version, you don’t have to upgrade your firmware.
2 Installations 2.5.1.2. USB Storage If you have a USB memory stick, you can update the firmware from it by performing the following steps: ① Download a new firmware from the AZBox web site. ② Copy the firmware file to your USB memory stick. ③ Insert the USB memory stick into the USB port of the digital receiver. ④ Select the Settings > System Information > Firmware Upgrade menu, then the files in the USB memory are listed.
2 Installations NOTE Your USB memory must be formatted in the FAT file system. Otherwise, the digital receiver cannot recognize your USB memory. In addition, the digital receiver can only recognize files and directories which are named with only alphabetic, numeric and underscore letters. If there is a file or folder named with other letters, the digital receiver cannot recognize not only it but also its subsequent files and folders.
3 Settings 3. Settings If it is first time using the receiver, you will need to set the correct parameters for the system configuration. The settings menu is to set all the parameters for the equipment you are using. 3.1. System Information You can check the current information of the digital receiver from this menu; Firmware Version, Last upgrade, Resolution, MAC address, (AZBox Premium HD+ also shows MAC wireless address if you have), IP and Internet status.
3 Settings You can also upgrade your firmware version or download channels through the Internet, USB or Ethernet. To upgrade your firmware, see § 2.5. 3.2. Language/Time settings You can select the language in which the menu would be displayed. In addition to that, you can select the language of audio track and of subtitle track. Select the Setting > Language/Time menu. 3.2.1.
3 Settings Portuguese, Dutch, Korean, and so forth. Set the Menu Language option to your desired language. Once you select a language, the menu will be immediately displayed in the selected language. The default setting is English. 3.2.2.
3 Settings 3.3. Local time setting You should set your local time for timer events. If you do not set the local time correctly, the program time table provided by the program guide may be distrustful. For the program guide, see § 4.1.3.1. Select the Setting > Language/Time menu. You should see a screen like the figure above. You can set the clock: Manual, Air, Internet, or use the time signal, Greenwich Mean Time (GMT), carried as part of the digital television broadcast.
3 Settings ① Set the Time Offset option to the time difference between your time zone and GMT referring to Table 3.3. ② Make sure that your local time is correctly displayed on the Local Time option. To set the local time manually, set the Mode option to Manual and enter your local time to the Time option with the Number buttons. The time format is day/month/year 24-hour: minute. If daylight saving time is observed in your state at the moment, set the Daylight Saving Time option to Yes.
GMT GMT GMT GMT GMT GMT GMT GMT GMT GMT GMT GMT GMT GMT GMT GMT GMT + + + + + + + + + + + + + + + + London, Lisbon, Casablanca 1:00 Paris, Brussels, Copenhagen, Madrid 2:00 South Africa, Kaliningrad 3:00 Baghdad, Riyadh, Moscow, St.
3 Settings 3.4. Timer With timers, you can turn your digital receiver on or off whenever you wish. Once you have set the timer, the receiver will operate automatically. Timer Menu allows you to select the timer number, state, cycle, service, and the operation time. 3.4.1. Timer Number The Maximum number of timers is 8. If all of the timers have been used you will have to erase an existing timer before a new timer can be set.
3 Settings 3.4.2. Timer State You can choose the use of the selected timer. Each timer can be turned on or off. 3.4.3. Timer Cycle Each timer can be programmed to occur at various time intervals. There are four timer modes: One Time means literally ‘one time’ Every Day means literally ‘every day’ Weekdays means ‘Monday to Friday’ Weekend means ‘every Saturday and Sunday’ 3.4.4. Timer Service You can choose the operation of the selected timer. Each timer can be selected sleep or wake up. 3.4.5.
3 Settings 3.5. Internet 3.5.1. Network : Wi-Fi, Wired network. The default setting is Wired network. To use WIFI, you need to set Wi-Fi and press the OK ( ) button. For 802.11b/g specification, see Appendix A. 3.5.2. IP Setting : Dynamic IP (DHCP), Static IP. The default setting is DHCP.
3 Settings server assigns these parameters. To apply DHCP, 1. In IP setting option, choose DHCP IP and press the OK ( 2. Select the setup below to apply the configuration. ) button. Static IP: The system’s IP-address, IP-subnet mask and Gateway must be specified in the IP-address. To apply Static IP, 1. In IP setting option, choose Static IP and press the OK( ) button.. 2. Input information IP address, subnet, gateway, DNS1 and DNS2 3. Select the setup below to apply the configuration. 3.5.3.
3 Settings 3.6. Storage 3.6.1. Device Device option shows the list of the devices (HDD or USB) which connected to your digital receiver. P(number) means the number of the device’s partition. To delete partition press the Delete Partition ( ) button. 3.6.2. Partition Partition option shows the status of selected partition.
3.6.3. Partition Format To use the device with the digital receiver, you need to format it before using it. Delete all partitions of the device you want to use, and select Format with the OK ( ) button. You cannot divide partition in this menu.
3 Settings 3.7. Video and audio settings You have to configure the video and audio settings appropriately for your television set and other appliances. Select the Setting > Audio/Video menu. You should see a screen like the left figure. The picture format for an HDTV is a combination of screen format and video resolution and is different for normal-screen and wide-screen HDTVs.
3 Settings 3.7.1. Video Format You can choose the video format: PAL or NTSC PAL for Europe and North America and NTSC models for North America. The default setting is PAL. 3.7.2. Video resolution Your receiver can transmit pictures to your TV in a range of resolutions. Generally, higher screen resolutions give better quality pictures. However, if your television set does not support high definition, you cannot enjoy high definition quality picture.
3 Settings 3.7.3. Screen Format The TV that you have connected to your set-top has an aspect ratio (width-to-height ratio) of 4:3 (basic/standard) or 16:9 (widescreen). You must set the appropriate TV Aspect Ratio on your set-top, so that it is compatible with the TV. Two settings are available: 4:3 and 16:9. You should set the TV Aspect Ratio to 4:3 or 16:9 as appropriate. If you have a wide-screen television, set the Screen Format option to 16:9.
3 Settings 3.7.6. Default Audio Format You can choose the default audio format: AC3 or off. The default setting is Off. 3.7.7. Audio Output You can choose the audio output: Stereo, Left (Mono) or Right (Mono). Basically, there are two audio sources as you can find two audio sockets on the back panel of the digital receiver. You can enjoy only one source or both of them in either Stereo, Left (Mono), and Right (Mono). Set the Sound Output option as you desire. The default setting is Stereo. 3.7.8.
3.7.9. RF Channel Number You can choose the RF channel number: 21 to 69. Your TV must be set to this channel in order to view the output of your receiver. If this channel is currently being used as a broadcast channel or if you are getting interference on this channel, you may change the channel to an unused number. Then change your TV to that channel in order to view the output. The default setting is 21. 3.7.10. RF Audio Type You can choose the RF audio type. The default setting is B,G 5.5Mhz.
3 Settings 3.8. TV Channel 3.8.1. Antenna Setup The Antenna Setup menu controls all the parameters for your installation. Ensure that your satellite receiver is correctly connected to your television and dish, and that your satellite signal is of good quality by checking the Strength and Quality meter. (If you are not sure about this, then ask your installer to check your installation or satellite signal).
NOTE A minimum level of stable signal Quality is required to be able to search and view the channels. 3.8.1.1. Satellite Name 1. Select the satellite you want to program. Scroll through the various satellite using the Navigation ( ) buttons and select the appropriate satellite by press the OK ( ) button. 2. When you select the satellite by pressing the OK ( ) button, the satellite will be selected and that satellite’s default parameters will appear. 3.
3 Settings 3.8.1.2. LNB Frequency To scan channels, you must select the correct LNB type that you have on your dish. The default value is for the Universal LNB. Select the proper LNB type using the buttons according to the LNB type you are using.
3 Settings 3.8.1.3. DiSEqC 3.8.1.4. 22KHZ Tone 22KHZ Tone option is set to OFF for each LNB type, but can be turned ON. If the LNB Frequency is set to Universal, you do not have to use this option. 3.8.1.5. 0/12V Switch You can select the option between 0V and 12V. 3.8.1.6. LNB Power Set LNB power ON or OFF by using buttons.
3 Settings 3.8.1.7. TP Frequency Select a specific transponder by using the the OK ( buttons, or pressing ) button to view the drop-down list. 3.8.1.8. Positioner Setup 3.8.1.8.1. DiSEqC 1.2 This mode will allow you to set the antenna position for each satellite. In order to use antenna positioner you must use a motor controlled by DiSEqC 1.2 commands. To move the antenna, select the desired satellite, transponder and step size.
3 Settings the OK ( ) button. To clear a saved satellite position, select satellite then choose Resetting from the Command Mode and press the OK ( ) button. Setting and enabling East and West limits that the dish can move to is done. Setting East Limit: Move the dish to the most eastern position and press the OK ( ) button to store it. Setting West Limit: Move the dish to the most western position and press the OK ( ) button to store it.
3 Settings 3.8.1.8.2. USALS This mode will allow you to use a DiSEqC 1.3/2.3 motor controlled by USALS (Universal Satellite Automatic Location System). The first time you select USALS, you must enter your location (longitude and latitude). You can also edit the satellite’s position. This will be necessary if you add a new satellite because it will be set to zero by default. Select Go To Position option and press the OK ( ) button in the Command Mode to move the dish to the satellite position.
3 Settings 3.8.1.9. Network Search Some of the new transponders being broadcasted in the satellite could be missing in the given TP list. In this case, there is a good chance that the information of those new transponders are being sent through the given TP. So, if you set the Network Search to ‘NIT’ status and search that TP, then you will be able to catch the channels in those new transponders.
3 Settings 3.8.2. Satellite Scan Satellite can be scanned directly from the Satellite Scan menu, Select Satellite Scan menu and press the OK ( ) button. Scroll through the satellite dropdown list, and select a satellite by pressing the OK ( ) button. When you press the OK( ) button to start process, you will be given four options in the search criteria: TV channels, Radio channels, FTA (Free-to-air) channels and Scrambled channels. You can select or deselect any of the options.
3 Settings Once you have selected the desired satellites, press the OK ( ) button to start searching those satellites. The receiver will search all satellites selected with the Check ( ) button. To save the searched channel list, press the OK( 3.8.3. ) button. TP Scan Individual transponders (TP) can be scanned with TP scan. Scroll through the satellite dropdown list, and select the satellite to be scanned. Using the Check ( ) button, you can select more than one satellite.
3 Settings 3.8.4. Advanced Scan The channel search procedure can be performed in different ways. Start by selecting the satellite to be searched in the Advanced Scan menu. The TP frequency can be entered manually by using the Number buttons, or selected from the dropdown list that appears when you press the OK ( ) button while highlighting the Frequency field.
3 Settings TP. 1. PCR: Enter the PID (Packet Identifier) for the PCR(Program Clock Reference). 2. Video: Enter PID for the video signal. 3. Audio: Enter PID for the audio signal. 3.8.5. SAT/TP Edit In this menu, you can add/delete the satellites or transponders. 3.8.5.1. Add satellite (TP) Press the Add Satellite ( ) button to add a new satellite(or TP) to the receiver. Enter the new satellite (or TP) name and position. The new satellite (or TP) will be added to the bottom of your list. 3.8.5.2.
3 Settings 3.9. Parental control In general, television programs are classified according to the level of violence, nudity and language of their content. You can prevent your children from watching specific programs by adjusting Parent control option. In parental control menu, you can set the censorship classification or change the password. 3.9.1. Change password Select the Setting > Parental Control menu. You should see a screen like the left figure, and you will be asked your Password.
3 Settings The default password is set to ‘0000’. To change the password, select the Change password menu; enter your previous password inside the white box and select Change. Then an input box appears. You can change the password to a desired number. If anyone is trying to watch a program that is of or above the censorship setting, the person has to enter the personal identification number to override. NOTE DO NOT FORGET YOUR PASSWORD. 3.9.2. Menu lock feature You can also restrict uses of some menus.
3 Settings When you are watching a program, you can check its program classification on the information box. NOTE If a program does not have any program classification information, your censorship setting will not take effect.
3 Settings 3.10. Data Reset The digital receiver maintains the following data: • • • • • Satellite list Services list Favorite list Timer list Preference settings You can reset all data of the digital receiver. Before you enter the date reset option, you must input your password. 3.10.1.
3 Settings condition, select Factory setting. Then a warning message will be displayed. To confirm, select YES. All satellite and transponder lists will be set to the factory default. On selecting factory setting you will lose all of the data and information, which was previously installed. NOTE A factory reset will not delete any recorded programs. 3.10.2. Delete all channels All channels, for all satellites will be deleted. 3.10.3.
3 Settings 3.11.
4 Main Menu 4. Main Menu To open Main Menu, wherever you are, press the Home ( ) button on your remote control.
4 Main Menu 4.1. TV 4.1.1. Watching television 4.1.1.1. Changing Channels You can change channels in three ways: ① Press CH ∧/∨ on the front panel, or press CH ∧/∨ ( ) or on the remote control to change channels. ② Press the OK( ) button while using the channel selection. ③ Enter the number of the channel you want to tune using the number buttons on the remote control. 4.1.1.2.
4 Main Menu 4.1.2. Channel Selection To view the Channel Selection, press the OK( ) button. On the services list, you can see the service information: ① Service number and name ② Transmitting satellite ③ Channel Information ④ Transponder information To watch a desired channel, put the highlight bar on its entry with the Navigation buttons and press the OK ( ) button, then it will be presented.
4 Main Menu the single EPG of the channel will be shown. See § 4.1.3.1.1 for more details. 4.1.2.1. How to sort the channels You can sort the channels; ALL, Satellite, Genre, Provider, Country, FTA/CAS, and FAV. ① ALL: show the all channels you can watch. ② Satellite: sort the channels by satellite. Then only services provided by the selected satellite will be listed. ③ Provider: sort the channels by provider. you can view service entries by groups of broadcasters.
4 Main Menu 4.1.2.2. Favorite channel lists The Favorite channel list (FAV) function is used to organize your channel list and create and edit your favorite channels. The Maximum number of FAV groups is 50. And 200 channels per each group. To select a favorite service, put the highlight bar on a desired group and press the OK ( ) button; a highlight bar appears on its favorite services list. Once you select a desired service with the OK ( ) button, it will be presented.
4 Main Menu service of the selected group. 4.1.2.3. Channel Edit To edit the channel, press the Menu ( ) button; Lock, Skip, Delete, Add to favorite, Insert HD flag, Rename, and MOVE. ① Lock: Lock channels. To watch the locked channel, you must enter your password. ② Skip: Skip channels. But you can watch the channel by press its channel number. ③ Delete: Delete channels from the channel list. The deleted channel cannot be recovered unless you do a channel scan again.
4 Main Menu 3.7.2 for more details. ④ Add to favorite: Add channels into your favorite list. Put the highlight bar on a desired group and press the OK( ) button. ⑤ Insert HD flag: Insert the HD flag to channels. ⑥ Rename: Change the name of the highlighted service, See § 4.2.1 for how to use the on-screen keyboard. ⑦ MOVE: Move channels to a different position, in FAV category only. 4.1.2.4.
service. ⑤ Number symbol ( or number) means the censorship classification of the program. ⑥ Dolby symbol ( ) means a Dolby audio track is provided on the current program. When you are not using time-shift, if the EPG is provided on the current service, you can see the information about the current and next programs with the 4.1.2.5. or button. Selecting subtitle lists Some programs are provided with subtitle lists in one or more languages.
4 Main Menu 4.1.2.6. Viewing Teletext The display of teletext is based on transmitted data using the EBU Teletext specification and DVB Bitmap and can only be viewed on a TV that supports teletext. If the current service provides teletext, the teletext symbol ( Text ( ) will be displayed on the information box. Press the ) button to view teletext pages. Each menu shows short information at the bottom of the screen. To clear the teletext screen, press the Exit ( 4.1.2.7. ) button.
4 Main Menu 4.1.3.
4 Main Menu 4.1.3.1. EPG (Electronic Program Guide) The TV/Radio EPG (Electronic Program Guide) provides an overview of available TV and Radio channels, and programs the broadcasters have scheduled for now, next and beyond, depending on which program information they transmit. To display EPG, press the Guide ( ) button on the remote control. To see detailed information of a desired program, put the highlight bar on the program with the navigation button and press the Info( ) button.
4 Main Menu To watch the selected program, press the OK( ) button. The selected program will appear when it is broadcasting. If not, you can reserve to record or watch the channel. See § 4.1.3.2.3 for more details. NOTE - For displaying EPG, you will need to set Timer option in SETUP menu. - A 'Information is not available' message is displayed if the selected channel has not obtained EPG data. 4.1.3.2. Single EPG Single EPG shows the program schedule of the selected channel.
4 Main Menu 4.1.4.1. PVR 4.1.4.1.1. Internal HDD (AZBox Premium HD+) HDD should be mounted manually.
4 Main Menu 4.1.4.1.2 PVR Ready (USB) – (AZBox Premium HD+) When you use USB devices such as USB hard-disk drive (HDD) and USB memory stick, or internal hard-disk drive (HDD) with this receiver, you should make sure that the HDD be formatted in FAT file system, not NTFS. If you tyr to record TV channels on USB Memory stick, it may not support recording and timeshift properly. In case you use NTFS formatted HDD, (a) PVR features are not supported. (b) The receiver may not boot-up properly.
4 Main Menu 4.1.4.2. Record Live TV You can instantly record the program you are watching at present. If the information about program is provided by the EPG, the current recording will stop when the current program is scheduled to end. If not, it will record for 2 hours. To record a program, take the following steps: 1. Press the REC ( ) button during the program or select Record in the detail menu. 2. Choose the device you want to record and select Yes. 3.
⑦ Program: The recorded program will be stored with this name. To set a reserve recording with the above settings, select Reservation. Otherwise, it will not be saved and will not occur. NOTE - In normal TV viewing mode the Reserved Program alert banner will appear on the screen before a reserved program starts. - You cannot record and play the programs which are being broadcast at the same time.
4 Main Menu 4.1.4.4. Reserve recordings using the EPG If the EPG is properly provided, you can make reserve events on it. The instructions on how to make reserve recordings using the EPG are as follows: ① Display the EPG in the Detail Menu. ② Select a service you want to record with the and buttons. ③ Select a program you want to record with the and buttons, and press the OK( ) button. ④ To make a timer event with recording, select record and choose the device you want to record to.
4 Main Menu NOTE If you switch to other service or use time shift in the middle of recording a pay program, it will be recorded without descrambling from that moment. Even if the recording is only partially descrambled, you need the subscription card to play it back. 4.1.4.6. Recorded Program When a program is recorded, it is stored as a file on the built-in hard disk drive of the digital receiver or USB memory stick. You can select a recording to play back from the recorded program list.
4 Main Menu 4.1.4.8. Time-Shift You can pause and resume a live television program, and even rewind and replay it. When you are watching a program and you miss something, you can rewind and replay it. Or when your attention is needed elsewhere, you can pause it and resume it a short time later without losing any of it. When you do this, you are no longer watching the live program, instead you are watching a delayed presentation of it. This is called time shifted television.
4 Main Menu NOTE Do not remove the USB while recording a program or using the timeshift. It may cause disorder.
4 Main Menu 4.2. YouTube 4.2.1. How to search in the YouTube Press the Search ( and press the OK ( ) button. Enter search text in the box that appears ) button on the remote control. The system will list all entries that contain the entered letter combination. When accessing an input field where letters are required, the system automatically goes to letter mode. Writing letters works like on a mobile phone. Press the button that corresponds to your desired letter.
4 Main Menu Change to lower, upper case letters or back to numbers with the CAP/NUM ) button, and space with the button. NOTE How to write "AZBox 123" in the input field: Press the button once to change to upper case letters Press the button once to get an "A". Press the button twice to change to lower case letters. Press the button three times to get a "z". Press the button twice times to get a "b". Press the button three times to get an "o". Press the button twice to get an "x".
4 Main Menu 4.2.2. Load Video Lists You can also search the UCC (User Created Contents) for your interest. Press the Menu ( ) button and select Feed, Category, Time and Site. The default setting is [featured / all / all time / global]. When you press the Search ( ) button on remote control, the receiver will show the list based on your preference.
4 Main Menu 4.3. File Play & Management There are two different ways to play video/audio/photo file from your device. • HDD: If HDD is connected to IDE inside the box, user may use this function to play local files in hard disk drive. • USB: If USB device is connected to external USB port, user can play files stored in the USB device. 4.3.1. Movie / Music / Photo If you want to run the files that stored in your device, select Movie, Music or Photo menu.
4 Main Menu 4.3.1.1. Movie ① Set play mode: Play once or Repeat. ② Multi audio: Select Audio ③ Subtitle: Select Position, Size, View, Sync and Language. ④ Screen control: Brightness, Saturation, Contrast, Hue and Zoom. ⑤ Video setup: Full or Auto.
4 Main Menu 4.3.1.2. Music Set play mode: Standard play, Repeat, Repeat all or Random.
4 Main Menu 4.3.1.3. Photo ① Image optimization: optimize the selected image. ② Start slideshow: Pictures will automatically slide in every 5 seconds. ③ My Album: Create your own album. ④ Arrange: You can arrange the images by its Name, Date or Size. ⑤ File View: List, Thumbnail or Tile.
4 Main Menu 4.3.2. File Management In file management menu, you can not only play all supported files, but also create folder, rename or copy files. Folder option: Create folder, Rename and Arrange. File option: Copy, Cut and Paste.
4 Main Menu 4.3.2.1. Move files to another folder To copy, cut and paste files to another folder, perform the following steps: 1. Select files to copy or cut with the Check( ) button. 2. Press the Menu ( ) button, and select the option you want to perform with the files. 3. Move your cursor to the folder where you want to paste it. 4. Press the Menu ( ) button, and select the paste option.
4 Main Menu 4.4. RSS News RSS (Rich Site Summary) is a format for delivering regularly changing web content. Many news-related sites, weblogs and other online publishers syndicate their content as an RSS Feed to whoever wants it. RSS solves a problem for people who regularly use the web. It allows you to easily stay informed by retrieving the latest content from the sites you are interested in. You save time by not needing to visit each site individually. 4.4.1.
To add a new category, take the following steps: 1. Press the Menu ( ) button. Select the Add new category option, and press the OK ( ) button. 2. Enter a new category name in the box that appears and press the OK ( ) button. 4.4.2. Register new channel To register a new channel, take the following steps: 1. Press the Menu ( ) button. Select the Register new channel option, and press the OK ( ) button. 2. Enter a new RSS address in the box that appears and press the OK ( ) button.
4 Main Menu 4.5. Browser Select Browser on main menu, it will display the default page set in the box. If you want to change the default page, press the Set Home ( ) button on the remote control. To surf different web page, you can move the cursor to the URL box, and type URL address. 4.5.1. Favorite List The Favorite list (FAV List) function is used to organize your favorite list and create and edit your favorite sites. To add your favorite site to your list, take the following steps: 1.
2. Input the site address. See § 4.2.1 for how to use the on-screen keyboard. 3. Press the OK( ) button to save the site to your favorite list.
5 Network 5. Network You can connect the digital receiver to the computer. Then you can copy files to or play files through the network. Before you use the network, the Settings > Internet menu must be set. When you use a Wi-Fi, you should know whether you have a good connection. While the receiver is in stand-by mode, the network runs by itself. 5.1. Connect the digital receiver to the computer To connect the digital receiver to the computer, take the following steps: 1.
5 Network 5.2. Connect the receiver. computer to the digital To connect the computer to the digital receiver, take the following steps: 5.2.1. Windows XP ① Computer settings: When you place your mouse on the folder that you want to share and click the right mouse button, you pop up a limited menu of commands. Select the “Share and Security” option. ② Check the “Share this folder in Network” option and input the share name. Then select “Confirm” or “Apply”.
5 Network “Use”, “Share File” option to “Use”, “Share Folder” option to “Use” , “Share Printer” option to “Use”, “Share protected with Password” option to “Not Use” and “Share Media” option to “Use”. ④ Check your selection carefully and move to the “My Computer”. ⑤ When you place your mouse on the folder that you want to share and click the right mouse button, you pop up a limited menu of commands. Select the Share option. ⑥ Add the Everyone (All users in this list) option and choose “Share”.
6 Product specifications / Warranty 6. Product specifications / Warranty 6.1. Product specifications 6.1.1. Power specifications 6.1.1.1. AZBox Premium HD+ Input voltage 11V, 3.4Am / 24V, 800m Power consumption 60W at maximum in operation 5W in standby 6.1.2. Physical specifications 6.1.2.1. AZBox Premium HD+ Size 340 x 243 x 66mm Gross Weight (w/o HDD) 2.65 kg Gross Weight (with HDD) 3.04 kg Net Weight (w/o HDD) 2.11 kg Net Weight (with HDD) 2.
6 Product specifications / Warranty 6.2. Warranty 6.2.1. Warranty Terms and Conditions This warranty must be presented at an OpenSAT authorized repair service station before any repair can be made under conditions of the warranty. This warranty is valid only if the Warranty Certificate and proof of purchase are presented at the OpenSAT repair service station, in addition to the one year Warranty, issued by OpenSAT Corporation in the region.
6 Product specifications / Warranty Please note that such OpenSAT Service Center do no exist in all countries. The customer shall transport the product to the dealer or OpenSAT authorized service station at his own risk and shall be responsible for any costs incurred in transporting the product.
6 Product specifications / Warranty Certificate. This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment, such as the Phone cable, Power cord and Phone splitter. OpenSAT’s sole liability under this warranty shall be limited to repairing or replacing the product.
contained in it is incomplete or illegible. Since the Warranty Certificate will not be re-issued, keep it in a safe place. 6.2.4.
7 Appendix A 7. Appendix A. 802.11b/g Specification 802.11b/g channel frequency FCC (US) ETSI (Europe) (GHz) (GHz) 1 2.412 2.412 2 2.417 2.417 3 2.422 2.422 4 2.427 2.427 5 2.432 2.432 6 2.437 2.437 7 2.442 2.442 8 2.447 2.447 9 2.452 2.452 10 2.457 2.457 11 2.462 2.462* 12 — 2.467* 13 — 2.472* Channel ID *Antenna Gain - Main 2.4GHz : 2.87 2.45GHz : 2.93 - Aux 2.4GHz : 2.71 2.45GHz : 2.97 *RF Modulation Type - IEEE 802.11g : BPSK, QPSK, 16QAM, QFDM - IEEE 802.
8 Appendix B 8. Appendix B. TV Brand List Brand Name A.R.
8 Appendix B Akito Akura Alaron Alba Alkos All-Tel Allstar Amplivision Amstrad Anam AnamNational Andersson Anglo Anitech Ansonic Apollo ArcenCiel Arcam Ardem Aristona ArthurMartin ASA Asberg 0037 0037 0009 0714 0216 0037 0009 0668 0247 1908 0035 0865 0037 0370 0009 0218 0412 1982 0037 0037 1163 0009 0009 0282 0370 0668 0247 0473 0109 0216 0486 0556 0556 0163 0105 0037 0556 0556 0218 1982 0668 0282 0412 0264 1037 0418 0355 0163 0443 0556 0370 0218 0487 1935 0714 0371 0216 0036 0516 0037 0362 026
8 Appendix B Asora Astra Asuka ATD Atlantic Atori Auchan Audiosonic Audioton Audioworld Autovox AVP AWA Axxent Axxon B&D Baird Barco BasicLine Bauer Baur Beaumark Beko Belson Bennett 0009 0037 0218 0698 0037 0009 0163 0009 0556 0370 0486 0698 0247 1908 0011 0412 0606 0009 0714 1217 0109 0208 0163 0374 0556 0455 0805 0009 0037 1505 0178 0714 0037 0606 1191 0556 0556 0216 0264 0556 0216 0037 0109 0264 0370 0374 0714 0218 0264 0820 0715 0486 0036 0037 0108 0009 0556 0264 0374 0216 1376 0193 11
8 Appendix B BenQ Beon Berthen Best Bestar Bestar-Daewoo BlackDiamond BlackStar BlackStrip Blackway Blaupunkt BlueSky BlueStar Bondstec Boots Bosch BPL Brandt Brandt_Electronique Brinkmann Brionvega Britannia Brother Bruns BSR BTC Bush 1756 0037 0668 0370 0037 0374 1163 0821 0247 0035 0282 0191 0327 0036 0037 0668 0218 1191 0282 0247 0009 0327 0037 0625 0343 0287 0037 0418 0037 0216 0264 0486 0163 0218 0668 0036 0556 0418 0556 0370 0374 0820 0753 1037 0556 0218 0535 0328 0195 0455 0200 0170 0
8 Appendix B Canton Capsonic Carad Carena Carrefour Carver Cascade Casio Cathay CCE Celestial Centrex Centrum Centurion Century CGE Cimline Cinex City Clarivox Clatronic Clayton CMS Cobolt Combitech Concorde Condor 0355 0264 0208 0556 0778 0218 0264 0610 1037 0455 0036 0170 0009 0037 0037 0037 0819 0780 1037 0037 0247 0074 0370 0009 0648 0009 0418 0037 0218 0009 1037 0216 0891 1908 0009 0037 0363 0361 1556 0714 0374 1037 1259 1900 0519 0487 0698 1908 0037 0556 0668 0037 0070 0556 0037 0556 0037
8 Appendix B Conia Conrac Conrad Contec ContinentalEdison Cosmel Crosley Crown CSElectronics CTC CTX CurtisMathes Cybertron Cytronix D-Vision Daewoo Dainichi Daitsu Dansai Dansette Dantax Datsura Dawa Daytek Dayton 0009 0411 0754 0808 0037 0216 0264 0109 0009 0247 0009 0037 0606 0653 0216 0247 1756 0093 0218 1298 0037 0634 0661 0216 0880 0218 1267 0037 0216 0412 0370 0715 0208 0009 0698 1207 0282 0163 0821 0247 0264 0894 0418 0556 0009 0037 0287 0037 0074 0712 0556 0715 0339 0218 0011 0556 0487 055
Daytron deGraaf DEC Decca Deitron Denko Denver DER Desmet Diamant Diamond Digatron Digihome Digiline DigiLogic Digitex Digitor Digivision DigiX DiK Dixi DL Domeos Domland DreamVision DSE DTS Dual Dumont Dunai 0009 0208 0795 0516 1908 0037 0264 0037 0587 0193 0037 0037 0264 0216 0037 1149 0037 0037 0820 0037 0361 0880 0037 0009 0891 0865 0668 0394 1704 0861 0009 0343 0352 0631 0070 0163 0374 0163 0860 0037 0037 0548 0891 0556 0556 0363 0556 0374 0218 0556 0606 1189 0556 0556 0698 0371 0556 0009
8 Appendix B Durabrand Dux DVX Dynatron EasyLiving Ecco Edison-Minerva Elbe Elbe-Sharp Elcit Elekta Elfunk ELG Elin Elite Elta Emco Emerson Emperor Enzer Erres ESC Est?le Etron Eurofeel EuroLine Euroman 0037 0037 0891 0037 1248 0773 0487 0435 0037 0411 0516 0247 0009 0282 1208 0037 0216 0548 0218 0009 0247 0714 0556 0361 0163 0282 0753 0037 0037 0163 0001 0163 0264 0037 0216 0370 1437 0556 0556 0556 1259 0706 0362 0556 0610 0370 0218 0516 0163 0191 0361 0516 0037 0163 0556 0264 1037 0556 0037 03
8 Appendix B Europa Europhon Evesham Excel Expert Exquisit Fagor FairTec FamilyLife Fast Fenner Ferguson Fidelity Finlandia Finlux Firstline Fisher Flint 0037 0037 0247 1248 0037 0163 0037 0037 1191 0037 1901 0374 0073 0193 0556 0108 1037 0163 0556 0216 0208 0163 0105 0346 0070 0480 0606 0037 0714 0247 0361 1363 0036 0163 0037 0455 0556 0516 0216 0163 0556 0556 0556 0556 0247 0556 0009 0625 0109 0035 0361 0287 0560 0343 0548 0335 0037 0653 0443 0512 0371 0264 0346 0363 0037 0163 0411 1556 0808
8 Appendix B Force Forgestone Formenti Formenti-Phoenix Fortress Fraba Friac Frontech Fujimaro Fujitsu FujitsuGeneral FujitsuSiemens Funai Furichi Futronic Future Galaxi Galaxis Galeria GBC GE GeantCasino GEC Geloso General GeneralElectric GeneralTechnic Genesis 1149 0193 0163 0216 0216 0093 0037 0009 0499 0247 0163 0865 0163 0556 0009 1298 0668 0860 0264 0037 0037 0370 0009 0163 0363 0343 0287 0163 0163 0556 0247 0374 0109 0343 0009 0009 0037 0556 0486 0556 0037 0610 0264 0370 0556 0370 0363 0009
8 Appendix B Genexxa Gericom Goldfunk Goldhand GoldStar Gooding Goodmans Gorenje GPM Gradiente Graetz GranPrix Granada Grandin Gronic Grundig 0218 0163 0865 0668 0216 0037 0377 0556 0363 0455 0487 0634 0499 1909 0516 0343 0335 1900 1376 0370 0218 0653 0714 0037 0648 0037 0208 0473 0363 0037 0610 0374 1037 0163 0195 0070 0037 0009 1298 0556 0412 1217 0880 0009 0178 0163 0606 0370 0247 0361 0714 0001 0216 0109 0715 1259 0556 0374 0009 0035 0218 0880 1037 0714 0036 0487 0480 1908 1308 0037 0668
8 Appendix B Grunkel H&B Haaz Haier Halifax Hammerstein Hampton Hanimex Hanseatic Hantarex Hantor Harsper Harwa Harwood Hauppauge HCM Hedzon Hema Hicon Hifivox Higashi Highline Hikona Hinari Hisawa 0706 0036 1308 1163 0808 0706 0698 0264 0264 0216 0218 0037 0163 0634 0377 0009 0037 0865 0773 0009 0487 0037 0009 0218 0556 0009 1467 0109 0216 0264 0218 0208 0218 0443 0282 1908 0556 0370 0178 0587 1935 1376 0009 1908 0343 1908 0556 0361 0370 0714 0037 0556 0499 0282 0661 0808 0556 0519 0394 0009 0486
8 Appendix B HISense Hitachi HitachiFujian Hitsu HMV Hoher HomeElectronics Hornyphon Hoshai Huanyu Hugoson Hygashi Hyper Hypersonic Hypson Hyundai Iberia ICE Ices Ict IISonic Iiyama Imperial 1363 0225 0108 0516 0556 0719 1137 0361 1576 0108 0009 0193 0714 0606 0037 0218 0374 0890 0216 0009 0361 0037 0264 1037 0037 0860 0037 0264 0556 0218 0037 1376 1217 0037 0084 0418 0208 1225 0473 0481 0109 0634 0105 0512 1149 0225 0610 1556 0556 0455 0216 1217 0578 0163 0499 0363 0744 0492 0480 0036 0343 0037 0548
8 Appendix B Indiana InFocus Ingelen Ingersoll InnoHit Innovation Innowert inotech Interactive Interbuy Interfunk Internal International Intervision Irradio Isukai ITS ITT ITTNokia 0037 1164 0487 0361 0009 0009 0516 0519 0865 0773 0037 0163 0411 0009 0512 0037 0163 0247 0037 1909 0216 0282 0377 0394 0264 0009 0247 0218 0455 0037 0264 0163 0548 0208 0361 0480 0556 0610 0714 0163 0037 0247 0037 1298 0820 0556 0361 0556 0282 0556 0218 1163 0512 0370 0327 0109 0037 0556 0556 0361 0200 0556 0264
8 Appendix B ITV JDV Jean JEC JMB Jocel Jubilee JVC Kaisui Kambrook Kamp Kapsch Karcher Kathrein Kawa Kawasho KBAristocrat Kendo Kennedy Kennex Kenwood Kingsley Kiota Kiton Kneissel 0606 0264 0374 1982 0036 0035 0037 0556 0712 0556 0653 0218 0650 0218 0216 0377 0216 0163 0037 0163 0714 0556 0371 0216 0163 0610 0519 0363 0648 0163 1037 0105 0216 0001 0556 0037 0610 0037 0631 0556 0363 0247 0499 0443 0634 1908 0374 0036 0606 0193 0418 0371 0093 0282 0455 0037 0009 0556 0361 0556 0282 1556 00
8 Appendix B Kobra Kolster Konichi Konka Kontakt Korpel Korting Kosmos Kotron Koyoda Kuba KubaElectronic Kyoshu Kyoto L&SElectronic LaSAT Lavis Leader Lecson Legend Lemair Lenco Lenoir Lesa LevisAustria Lexsor Leyco LG 0374 0362 1467 0037 0009 0037 0418 0754 0487 0037 0370 0037 0412 0009 0163 0163 0412 0163 0865 0486 1037 0009 0037 0009 0411 0037 0556 0009 0247 0037 1196 0264 0037 0377 0714 0109 0499 1908 0556 0435 0556 0247 0218 0556 0218 0894 0371 0641 0714 0587 0556 0556 0264 0418 0216 0714
8 Appendix B Liesenk&Tter Liesenkotter Lifetec Lloyd's Lodos Loewe Logik Logix Luker Luma Lumatron LuxMay Luxor LXI Madison Magnadyne Magnafon Magnavox Magnum Mandor Manesth Manhattan 1191 0361 0327 0037 0037 0668 0556 0714 0001 1037 0512 0556 0011 0193 0880 0668 1982 0037 0556 0363 0163 0037 1163 0361 0346 0178 0037 0247 0516 0037 0648 0715 0264 0037 0163 0037 1423 1305 0247 0037 0327 0009 0512 0218 0556 0328 0519 1037 0264 0556 0374 1137 1248 0009 1149 0633 0370 0698 0264 1217 0519 0790 0362
8 Appendix B Marantz Mark Master's Masuda Matsui Matsushita Matsuviama Maxam Maxdorf Maxim MCE Mediator Medion Megas Megatron MEI Melectronic Memorex Memphis Mercury 1267 0037 0037 0009 0499 0218 0037 0037 0011 0433 0163 0195 1908 0650 0587 0264 0773 1982 0009 0037 0037 0668 0698 1900 0610 0178 1037 0346 0343 0009 0411 0634 0661 0009 0009 0001 0163 0556 0556 0714 0037 0371 0556 0556 0355 0443 0516 0191 1037 0778 0412 0216 0715 0374 0009 0264 0487 0036 0363 0035 0335 0009 0371 0455 0208 0714 080
Merritt Metz MGA Micromaxx Microstar MicroTEK Mikomi Minato Minerva Minoka Mirror MistralElectronics Mitsubishi MitsuriGeneral Mivar Monaco Morgan's Motorola MTC MTlogic Multibroadcast Multitec Multitech Murphy Musikland 0548 0388 1163 0037 1037 0178 0037 0808 0808 0820 1149 0037 0487 0191 0412 1900 0193 0108 0178 0556 0163 0370 0009 0037 0093 0370 0361 0714 0193 0037 1037 0009 0370 0264 0216 0037 0361 0447 0195 0556 1533 0037 0556 0163 0746 0535 0587 0367 0191 0668 0556 0668 0218 1037 0556 0535 0
8 Appendix B MyCom Myryad NAD Naiko Nakimura Naonis Narita NAT National NEC Neckermann NEI Neovia Nesco Netsat Neufunk NewTech NewWorld Nicamagic Nikkai Nikkei Nikko Nobliko Nogamatic Nokia 1376 0556 0178 0037 0374 0363 1982 0226 0226 0170 0036 0037 0499 0037 0200 0418 0512 0037 0865 0247 0037 0037 0218 0037 0218 0216 0218 0035 0714 0178 0070 0109 0361 0492 0374 0610 0178 0037 0361 1982 0037 0163 0163 0606 0556 0556 0587 0455 0556 0653 0191 0556 0247 1170 0009 0011 0661 0370 0163 0411 1270 0374 170
8 Appendix B Nordmende Norfolk Normerel Novak Novatronic NU-TEC Nurnberg Oceanic Odeon Okano Olidata Omega Omni Onwa Opera Optimus Optonica Orbit ORcom Orion Orline Ormond Orsowe Osaki Osio Oso Osume OttoVersand 0109 0560 0556 0163 0037 0037 0037 0455 0163 0163 0548 0264 0370 0009 1376 0264 0780 0371 0037 0650 0093 0037 1504 0037 0714 0412 1196 0037 0668 0516 0218 0374 0037 0218 0036 1505 0714 0343 0335 0891 0195 0163 0287 0037 1259 0374 0556 0208 0473 0037 0556 0264 0891 0602 0556 0698 0218
8 Appendix B Pace Pacific Pael Palladium Palsonic Panama Panashiba Panasonic Panavision Papouw PatheCinema PatheMarconi Pausa Perdio Perfekt Philco Philex Philips 0037 0191 0247 0516 1908 0037 1037 0216 0370 1137 0418 0163 0264 0218 0001 0009 0556 0001 0650 0367 0163 0853 0037 0037 0163 0109 0009 0163 0556 0037 0084 0163 0519 0193 0556 0343 0556 0361 0009 0519 0535 0109 0282 0195 0226 0343 0556 0443 1137 0714 0037 0191 0556 0519 0412 0698 0418 0264 0247 0411 1505 0247 0363 0037 0556 0778 0216
Phocus Phoenix Phonola Pilot Pioneer Pionier Plantron Playsonic Policom Polytron Poppy Portland Powerpoint Prandoni-Prince Premier President Prima Princess Prinston Prinz Profex Profi Profitronic Proline Prosonic Protech 0200 1289 0037 0163 0037 0556 0760 0556 0361 0486 0370 0037 0714 0109 0074 0282 0009 0374 0487 0247 0009 0860 0009 0698 1037 0361 0009 0009 0037 0037 0411 0037 0371 0037 0264 0163 1756 1308 0556 0216 0556 0037 0011 1260 0109 0512 0486 0556 0037 0361 0084 0714 0370 0486 0193 0712 0037
8 Appendix B Proton Provision PVision Pye Pymi Quadral Quasar Quelle Questa R-Line Radialva Radiola Radiomarelli RadioShack Radiotone Rank RankArena RBM RCA Realistic Recor Rectiligne Rediffusion Redstar Reflex Relisys 0178 0499 0714 1191 0037 0009 0218 0247 0037 0512 0036 0084 0668 0264 0036 0037 0109 0556 0037 0516 0037 0009 0418 0264 0070 0036 0070 0625 0343 0178 0037 0037 0361 0037 0037 0865 0037 0556 1037 0556 0374 0412 0650 1505 0535 0247 0328 0556 1037 0865 0011 0191 0074 0070 0195 0346 0
8 Appendix B Reoc Revox Rex RFT Rhapsody Ricoh Rinex Roadstar Rodex Rover Rowa RoyalLux Rukopir Saba Sagem Saisho Saivod Saka? Sakyno Salora Salsa Sambers Samsung 0714 0037 0363 0264 0370 0486 0216 0037 0773 1037 0556 0264 0037 0036 0264 0216 0370 0556 0625 0287 0498 0714 0610 0618 0516 0264 0037 0668 0163 0455 0163 0548 0335 0516 0618 0556 0634 0556 0411 1909 0370 0247 0163 0264 0037 0556 0418 0668 1189 0037 0218 1900 0712 0037 0335 0009 0556 0560 0516 0548 0343 0361 0650 0455 0282 0830
8 Appendix B Sandra Sansui Santon Sanyo Save Saville SBR SchaubLorenz Schneider Scotland Scott Sears Seaway Seelver SEG SEI Sei-Sinudyne Seitech Seleco 0009 0208 0216 0037 0371 0753 0009 0208 0370 0163 0486 0037 1908 0037 0548 0486 1137 0394 0371 1037 1909 0163 1189 0178 0634 0556 0037 0668 0264 0362 1909 1505 0556 0516 1217 0363 0370 0519 0264 0163 0216 0625 0729 0602 0556 0455 0706 0861 1208 0339 0037 0170 0556 0036 0216 0108 0011 0009 0556 0556 0714 0374 0037 0352 0361 0163 1908 0193 036
8 Appendix B Sencora Sentra Serino Sharp Shintoshi Shivaki Show Siarem Siemens Siera Siesta Silva SilvaSchneider Silver SilverCrest Singer Sinotec Sinudyne Sky Skymaster Skysonic Sliding SLX Smaragd 0371 0435 0009 0035 0610 0093 0193 1393 0037 0037 0178 0418 0163 0191 0327 0361 0037 0370 0037 0648 1556 0036 0556 1037 0009 0247 0773 0163 0037 0037 0556 0105 0753 0865 0668 0487 0036 0264 0346 0218 0455 1193 0516 1163 0556 0556 0009 0216 0036 0200 0093 0653 0760 0443 0374 0009 0516 0535 0328 0200
8 Appendix B Soemtron Solavox Sonawa Soniko Soniq Sonitron Sonneclair Sonoko Sonolor Sontec Sony Sound&Vision Soundesign Soundwave Soyea Spectra Ssangyong Staksonic Standard Starlite Stenway Stern Stevison Strato Strong SunicLine Sunkai 0865 0361 0556 0218 0037 1467 0208 0037 0037 0282 0208 0361 0037 1505 0353 0093 0218 0178 0037 0773 0009 0009 0009 0037 0009 0009 0264 0282 0163 0435 1982 0037 1163 0556 0037 0355 1298 0163 0548 0037 0556 0370 0556 0556 0339 0009 0264 0163 0282 0556 1651 0036 0170 0
8 Appendix B Sunstar Sunwatt Sunwood Superla Supersonic SuperTech Supra Susumu Sutron Svasa Swissline Swisstec Sydney Sysline Sytong T+A Tandberg Tandy Tashiko Tatung TCM Teac TEC 0037 0371 0264 0455 0037 0516 0208 0805 0009 0218 0178 0335 0009 0805 0247 1504 0216 0037 0216 0447 0367 0361 0218 0036 0363 1556 0011 1191 0714 0698 1037 0455 0178 0418 1755 0009 0556 0037 0487 0556 0556 0216 0556 0455 0037 0009 0374 0218 0009 0287 0865 0009 0698 0264 0556 0216 0880 0556 0411 0163 0247 0170 0109
8 Appendix B TechLine TechLux Techica Technica Technics TechniSat Technisson Technosonic Techwood Tecnimagen Tedelex Teiron Teleavia Telecor Telefunken Telefusion Telegazi Telemeister Telesonic Telestar Teletech Teleton Televideon Teleview 0556 0037 1163 1189 0218 1982 0650 0037 0714 0037 1163 0556 0418 0706 0891 0009 0109 0037 0394 0625 0109 0498 1504 0073 0714 0037 0037 0556 0037 0037 0009 0037 0247 0163 0163 0037 0361 0556 0163 0668 1437 0556 1289 0556 0163 1267 0606 0208 0037 1537 0698 0556
8 Appendix B Tempest Tennessee Tensai Tenson Tesla Tevion Texet Thomson Thorn Thorn-Ferguson Tiny TMK Tobishi Tokai Tokaido Tokyo Tomashi Tongtel Topline Toshiba 0009 0037 0218 0105 0247 0009 0037 0519 0037 0648 1037 0374 0625 0109 0216 0108 0225 0074 0037 0512 0070 0108 0335 1196 0178 0218 0037 0374 1037 0216 0282 0780 1037 0508 0036 0718 0037 0556 0037 0374 0715 0556 0264 0556 0371 0163 0009 0377 1037 0894 1556 0668 1248 0009 0560 0335 1259 0556 1137 1289 0216 0343 0037 1298 0808 0714 0193 0
8 Appendix B Toyoda Trakton TransContinens TRANScontinents Transonic Transtec Triad Trident Tristar Triumph Tsoschi TVTEXT95 Uher Ultravox UnicLine United Universal Universum 1908 1164 1265 0009 0009 0668 0486 0865 0037 0512 0418 0216 0037 0516 0264 0516 0282 0556 0037 0486 0374 0037 0037 0714 1908 0037 0346 0535 0480 0011 0070 0411 1505 0631 1037 1149 0009 1163 0650 0371 0264 1037 0698 1935 1704 0264 0037 1556 0037 0556 0556 0264 0009 0455 0698 0587 0712 0556 0218 0218 0346 0193 0556 0556 0
8 Appendix B Univox Utax V7Videoseven Vestel Vexa Victor Videologic Videologique Videosat VideoSystem Videotechnic Videoton Vidtech ViewSonic Visiola Vision Vistar Vortec Voxson Waltham Watson WattRadio Wega Wegavox Welltech Weltblick Weston Wharfedale 0037 0163 1755 1217 0037 1037 0009 0653 0218 0216 0247 0037 0216 0163 0036 1755 0216 0037 0361 0037 0037 0163 0418 0668 0443 1037 0163 0519 1376 0163 0037 0009 0714 0037 0037 0037 0556 0163 0178 0880 1376 0163 1163 0037 0556 0668 0556 0216 0218 0
WhiteWestinghouse Windsor Windstar WindySam Wintel World-of-Vision Worldview X-View Xenius XLogic Xoro Xrypton Yamaha Yamishi Yokan Yoko Yorx Zanussi Zenith Zenor ZX 0556 0216 0668 0282 0556 0714 0880 1298 0455 1191 0634 0698 1196 0037 0650 0282 0556 0037 0037 0009 0247 0218 0363 1909 0339 1908 1556 0037 1037 0556 1909 0890 0877 0865 1217 1289 0860 1217 0556 1576 0455 0218 0037 0556 0556 0370 0218 0339 0264 0216 150
9 Appendix C 9 151
9 Appendix C 9. Appendix C. R&TTE Declaration Česky [Czech]: Dansk [Danish]: Deutsch [German]: Eesti [Estonian]: English: Español [Spanish]: Ελληνική [Greek]: Français Opensat, Lda tímto prohlašuje, že tento High Definition Set Top Box AZBox Premium HD + je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
[French]: Italiano [Italian]: Latviski [Latvian]: Lietuvių [Lithuanian]: Nederlands [Dutch]: Malti [Maltese]: Magyar [Hungarian]: Polski [Polish]: Definition Set Top Box AZBox Premium HD + est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Con la presente Opensat, Lda dichiara che questo High Definition Set Top Box AZBox Premium HD + è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Slovensky [Slovak]: Suomi [Finnish]: Svenska [Swedish]: Íslenska [Icelandic]: Norsk [Norwegian]: zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Opensat, Lda týmto vyhlasuje, že High Definition Set Top Box AZBox Premium HD + spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
