Stereo Bluetooth Transceiver ® Owner’s Manual Model BTT009
Thank you for choosing the Azeca Bluetooth® Transceiver Model BTT009. Please read this user’s manual carefully before use.
Note: Even though the paired device and this transceiver support the same Bluetooth profiles, functions may vary due to specification differences of the paired devices. • Disclaimer To pair a device to this transceiver the device must support the A2DP Bluetooth profile. Attaching this transceiver to a phone, music player, or computer as a transmitter in TX mode, requires a 3.5 mm stereo headphone jack.
Overview 1 6 2 3 5 4 1 Multi-function button (MFB): 2 Switching on/off, pairing 4 3.5mm audio jack Charging jack 5 TX/RX switch 3 LED indicator 6 3.5mm to 3.5mm audio cable 1. Charging BTT009 The BTT009 comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time. The LED flashes red when the BTT009 is at low power. Connect the USB charging cable to an available standard UPS port on a computer or use a USB wall charger.
2. Pairing with Bluetooth devices Connected the BTT009 using the provided jumper cable to a non-wireless device such as an MP3 music player, tablet, PC. Confirm that the receiver device that you are pairing with supports the Bluetooth A2DP profile. The pairing steps are as follows: 1) Make sure the transmitter is off, otherwise switch it off; 2) Keep the transmitter and your Bluetooth stereo receiver within 3 feet (the closer the better).
Note: • The pairing mode will last 2 minutes. The transmitter will enter standby mode if no devices can be connected within 2 minutes. • The transmitter can pair with a Bluetooth stereo receiver whose PIN NO.. is “0000”, “1234”or “1111”, “8888”. 3. Reconnecting to a Bluetooth device 1) Automatic connecting Every time the transmitter is switched on, it will automatically connect to last connected device.
RX Mode Selecting mode: Please turn the TX/RX switch to RX mode before switching on BTT009. Note: TX or RX mode cannot be changed after switching on BTT009. 1. Switching on/off the receiver FUNCTION OPERATION LED INDICATOR Switching on Receiver Press Button for 3-4 Seconds Blue LED is on for 1 Second Switching off Receiver Press Button for 3-4 Seconds Red LED is on for 1 Second and then off 2.
Pairing with a Bluetooth smartphone Please make sure your cell phone is Bluetooth-enabled. Specific pairing steps may vary with different models of cell phones. Please refer to your cell phone’s user’s manual for additional information. The general pairing steps are as follows: 1) Keep the receiver and Bluetooth cell phone within 3 feet when pairing; 2) Enter the receiver’s pairing mode by holding the MFB down for 5 to 7 seconds. The LED will flash alternating red/blue.
3. Play smartphone music on various devices. When the BTT009 is used as a receiver, you can connect it to a home stereo receiver, non-wireless speaker, or a car sound system auxiliary line-in jack. Use the included dual RCA Y adapter and 3.5mm stereo audio cable to attach the BTT009 to various devices. Use the On some devices the MFB allows pause/un-pause of music playing. This feature is not compatible with all devices.
7. LED indicator LED Indicator STATUS OF THE RECEIVER Red and Blue LEDs flash Alternately Pairing mode Blue LED flashes once every 1 second Standby mode and not connected to a device Blue LED flashes once every 4 seconds Connected to a device Red LED flashes Low POWER Care and maintenance • Do not expose the transceiver to liquid, moisture or humidity. • Do not use abrasive cleaning solvents to clean the transceiver. • Do not expose the transceiver to extremely high or low temperatures.
I cannot pair the transceiver with a device. • This transceiver will only work with devices that support the following Bluetooth profiles: A2DP. I still cannot get my transceiver to work • Call our Help Desk at 1(888) 992-4639 Specifications Bluetooth version Bluetooth V2.1 Bluetooth profiles A2DP and AVRCP Frequency range 2.402 GHz - 2.
FCC Part 15 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
LIMITED WARRANTY Azeca Corp (“Azeca”) warrants that (a) its Stereo Bluetooth Transceiver (Model BTT009) will perform substantially in accordance with the accompanying written materials for a period of 6 months from the date of receipt and (b) that Model BTT009 (product) will be free from defects in materials and workmanship under normal use and service for a period of 6 months.
WARRANTY LIMITATIONS TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AZECA CORP AND ITS SUPPLIERS DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO THE PRODUCT AND ANY RELATED WRITTEN MATERIALS. THIS LIMITED WARRANTY GIVES CUSTOMER SPECIFIC LEGAL RIGHTS. CUSTOMER MAY HAVE OTHER RIGHTS DEPENDING ON THE JURISDICTION.
Other Products by Azeca Stereo Bluetooth Speaker Play music from your Smartphone or MP3 player • Answer, redial or mute calls • Built-in mic for hands-free communication • Easy-to-reach controls for volume, next/previous track and pause • Automatically pairs with last Bluetooth device • Use battery or AC power • 30 foot range Retractable Bluetooth Headset with Vibration Earbud retracts instantly • Answer, redial, or made voice calls • Vibrates when a call is received • Clip-on or hang around neck • Include
