Product Brochure

AZEK Sheet
Actual Lengths
3/8" x 4'* 8' and 10'
1/2” x 4'* 8’ and 10’
5/8” x 4’ 8’, 10’ and 18'
3/4” x 4’ 8’, 10’, 12' and 18'
1” x 4’ 8’, 10’, 12’ and 20’
10
AZEK Sheet
(Traditional)
Perfect for bay windows,
dormers and raised panels.
Applications over 16" wide
are easy.
AZEK Adhesive
Container Size
4 oz. 32 oz.
8 oz. 128 oz.
16 oz. 5 Gal. (640 oz.)
AZEK Adhesive
Water-based, non-toxic, easy
to clean-up adhesive that is
perfect for AZEK to AZEK
adhesion. Glued joints will
never open.
* 3/8" and 1/2" sheet product is not intended to be ripped
into trim pieces. These proles must be glued to a
substrate and mechanically fastened. Contact your
AZEK Territory Sales Manager with questions.
AZEK Rabbeted
Cornerboard and Trim
(Traditional and Frontier)
With rabbeted edges, the
one-piece AZEK Rabbeted
Cornerboard is designed to ease
siding installation and deliver a
crisp, clean trim facade. AZEK
Rabbeted Trim also eases installation for a clean nish.
Rabbeted Cornerboard
Nominal Actual Lengths
5/4 x 4 1" x 3 1/2" 10' and 20'
5/4 x 6 1” x 5 1/2” 10’ and 20’
5/4 x 8 1” x 7 1/4” 10’ and 20’
(Traditional Only)
Rabbeted Trim
Nominal Actual Lengths
5/4 x 4 1” x 3 1/2” 18'
5/4 x 6 1” x 5 1/2” 18’
5/4 x 8 1” x 7 1/4” 18’
AZEK Trim and AZEK Mouldings should be installed using the same
good building principles used to install wood or composite trim and
mouldings and in accordance with the local building codes and estab-
lished installation guidelines. AZEK Building Products Inc. claims no
liability or responsibility for the improper installation of this product.
AZEK Trim and AZEK Moulding may not be suitable for every application
and it is the sole responsibility of the installer to be sure that AZEK Trim and
Mouldings are t for the intended use. Since all installations are unique, it is
also the installer’s responsibility to determine specic requirements in re-
gards to each trim application. AZEK Building Products recommends that all
applications be reviewed by a licensed architect, engineer or local building
ofcial before installation.
Technical information and AZEK Trim and Moulding Installation Guide-
lines are available online at www.AZEK.com or from your local AZEK
Dealer. If you have any questions or need assistance, please call
AZEK Customer Service at 877-ASK-AZEK (877-275-2935) or visit
www.AZEK.com.
* Patent Pending
†Traditional only
AZEK Cornerboard
(Traditional and Frontier)
With a seam that will not open,
AZEK Cornerboards offer time
savings during installation
while providing an upscale
look. Available in Traditional
and rustic Frontier in 10'
and 20' to complement any
housing exterior.
5/4 x Thickness
Nominal Actual Lengths
5/4 x 4 1" x 3 1/2" 10' and 20'
5/4 x 6 1" x 5 1/2" 10’ and 20’
6/4 x Thickness
Nominal Actual Lengths
6/4 x 4 1 1/4" x 3 1/2" 10'
6/4 x 6 1 1/4" x 5 1/2" 10'
AZEK Column Wrap
Easy to install, 3-Plus-1 column
wrap prole saves time and
installation costs. Three
connected panels and a fourth
“locking” panel t easily
around a structural support
with press t seams and nicely
nished corners. AZEK Column
Wrap is available in the Traditional nish.
Column Wrap
Nominal Actual Lengths
4 x 4 3 3/4" x 3 3/4" 10'
6 x 6 5 3/4” x 5 3/4” 10’
8 x 8 7 3/4” x 7 3/4” 10’
AZEK to Mill (ATM)
Perfect for use as a fabrication
component due to its thicker
prole. The consistent density
and solid color offer a superior
product for milling operations.
AZEK to Mill (ATM)
Actual Lengths
1 1/4" x 9 1/4" 18'
1 1/4” x 48” 8’
Beadboard
Nominal Actual Lengths
5/8 x 4 5/8" x 3 1/2" 18'
1/2 x 6 1/2” x 5 1/2” 18’
AZEK Beadboard
Reversible Beadboard prole
with edge/center bead on one
side and v-groove on the other
side. This design offers
exibility when planning your
project. Perfect for
wainscoting and porch ceiling.
1/2" Beadboard has a nailing
ange for easier installation.
AZEK Integrated
Drip Edge
*
Trim product designed to
assist with water management
efforts around window and
door surrounds. The two
piece product, which includes
a reversible trimboard, is
routed to accept a drip edge designed to help channel
water away from the window or door surround. For
easy installation, the drip edge has an integrated nailing
ange to reduce labor and installation costs.
1
1
⁄4" nailing ange
1
⁄8" drip edge overhang
Integrated Drip Edge*
Nominal Actual Lengths
5/4 x 4 1" x 3 1/2" 18'
5/4 x 6 1” x 5 1/2” 18’
11
All photos contained in this brochure are for display purposes only and not
for the purpose of validating the suitability or safety of any particular in-
stallation or application of the product. Always consult AZEK’s Installation
Instructions as well as local building codes to ensure proper installation.