Installation Guide

Page 12
AZEK Building Products
5215 Old Orchard Road, Suite 725
Skokie, Illinois 60077
AZEK.com • (877) ASK-AZEK [phone]
©2016 AZEK Building Products LIT-ATMINSTALL | REV 12/16
AZEK
®
Trim Care & Cleaning
CARE & CLEANING
• Power wash or hose off any loose dirt or debris. Make sure to test the setting for the power washer
to ensure it will not damage the surface of the board.
• If the board does not come clean, AZEK Trim products can be cleaned with Oxyclean and a medium
nylon bristle brush. Rinse with a hose or power washer (be sure to test the pressure so it does not
harm the surface of the board). Other cleaning methods include using a soft cloth and a mixture of
mild detergent. A Mr. Clean Magic Eraser has been shown to work on pencil or other black marks.
Other methods include denatured alcohol, mild household spray cleaner like Simple Green or Krud
Kutter Cleaner/Degreaser. When using cleaners other than a mixture of mild detergent and water,
it is best to test on a small area, or a scrap piece of AZEK Trim, to make sure it does not harm the
surface or damage the product’s appearance. Always read the cleaning product manufacturer’s
specific information before using any product on your AZEK Trim and follow their instructions.
• WARNING: KEEP CHILDREN AND PETS AWAY FROM CLEANING PRODUCTS AND THE TRIM UNTIL
COMPLETELY DRY.
• IMPORTANT: DO NOT USE SOLVENT BASED CLEANERS AS THEY CAN HARM THE FINISH OF
AZEK TRIM.
Consult with your paint manufacturer for instructions on cleaning AZEK Trim that has already
been painted.
For any other questions on AZEK Trim, visit AZEK.com or call us at 877-ASK-AZEK [phone].