TRIM MOULDING DECK AZEK Column Wrap Install Guide PORCH RAIL PAVERS
Installing Column Wrap WARNING! Please read all instructions completely before starting any part of the installation. • AZEK Column Wraps are not structural and are not intended for load bearing applications. • Manufactured edges of the column wrap are sharp and should be handled with care. • AZEK Column Wrap should be installed in accordance with the local building codes and the installation guidelines included below. AZEK Building Products Inc.
Installing Column Wrap 1 2 MEASURE POST HEIGHT AND CUT COLUMN WRAP TO DESIRED LENGTH (Optional) Three panel column attached Make sure three connected panels and locking panel are cut evenly. Stack and cut AZEK Column Wrap to desired length. Align loose locking panel Measure height of post. 3 ADD ADHESIVE TO THREE PANEL COLUMN WRAP Apply adhesive in the orange areas.
AZEK Building Products, Inc. 888 North Keyser Avenue • Scranton, PA 18504 www.AZEK.