User Manual

Page 6

INSTALLING THE NEXT BOARD

• Install the next board by inserting the grooved edge over the exposed

tongueonthestartingboard.Itmaybenecessarytoapplylightpres-

suretoensuretheboardisengagedcompletelytominimizeirregularity

in top seam.

• After board is fully engaged onto the starting board, drive fasteners

throughthetongueateachjoistasshowninDiagram2.Rememberto

countersinkthefastenersslightlytoprovidenecessaryclearancewhen

installing the next board.

Starting

Plank

INSTALLING THE REMAINING BOARDS

• Continuetoaddboardsperstep2untilouteredgeofporchis

reached.

• Finalboardmayrequireremovaloftongueorripcuttingtoa

necessary width. Use a table saw or circular saw to accomplish this.

Attach the last board by face fastening through the top or toe fasten

along the outer edge.

Diagram 2

Installation Instructions