User's Manual

Table Of Contents

GETTING STARTED

1. First, place the BARREL BLOCKING DEVICE over the barrel.

2. Always point your marker at a “SAFE” direction before use. To

use, push the safety button from the “PUSH SAFE” side of the

grip frame. Doing this will put the marker in a lock safe mode.

To unlock the safe mode, point the marker in the safe direction,

and push the safety button towards the “PUSH SAFE” side of the

grip frame.

3. Firmly screw in the CO2/ HPA/ N2 air tank to the On/Off Bottom

ASA (A091). Tighten the air tank clockwise all the way in the

marker’s bottom ASA.

CAUTION: Never use any hand tool to screw air tank to the

bottom ASA.

4. Attach a paintball hopper/ loader to the marker’s feed neck.

5. Remove the barrel blocking device and unlock the safe mode.

CAUTION: Now the marker is LIVE, pulling the trigger will

fire a paintball. Only test your marker at the safe direction

or in a proper organized paintball field.

6. Check marker’s velocity FPS (Feet Per Second). Turning the

Velocity Adjuster (P023) clockwise will increase the velocity.

Counterclockwise will decrease the velocity.