Operating instructions

18 OI/ADS430–EN Rev. A | Aztec ADS430 | Optical dissolved oxygen probe
8 Specification
Sensor type
Optical (luminescent) dissolved oxygen sensor
Probe
IP rating
IP68
Range
0 to 50 mg/l concentration; 0 to 600 % saturation
Accuracy
±0.1 mg/l, 0 to 8 mg/l
±0.2 mg/l, 8 to 20 mg/l
±10 % of reading, 20 to 50 mg/l
Resolution
0.01 mg/l
Response time
T90 < 45 sec; T95 < 60 sec @ 25 °C (77 °F)
Storage conditions
–5 to 60 °C (23 to 140° F)
Dimensions
47 mm (1.85 in.) diameter
203 mm (8 in.) length
Probe internal mounting thread
1
1
/4 NPT
Sensor cap
Typical working life
2 years
IP rating
IP68 (when fitted)
Storage conditions
1 to 60 °C (33° to 140° F) in factory container
Temperature sensor
Operating temperature range
0 to 50 °C (32 to 122° F)
Accuracy
±0.1 °C typical
Resolution
±0.01 °C
Power
Consumption (maximum)
50 mA @ 12 V DC
Measurement current
6 mA typical @ 24 V DC
Idle current (no measurement or consumption)
160 μA typical @ 24 V DC
Cable
Fixed length
10 m (39.3 ft.)
EZLink digital sensor connector IP rating
IP67 (when connected)
Extension cable (options)
1, 5, 15, 25, 50 m (3.2, 16.4, 49.2, 82, 164 ft.)
Maximum length (including optional extension cable)
Up to 210 m (826 ft.)
Salinity compensation
0 to 42 PSU (ppt)
Barometric pressure
506 to 1114 mbar (380 to 835 mm/Hg)
Environmental ratings
Pressure
10.342 bar (150 psi) from 0 to 50 °C (32 to 122 °F),
20.468 bar (300 psi) @ 25 °C (77 °F)
Operating temperature range
0 to 50 °C (32 to 122 °F)
Compliance
Heavy industrial, IEC:61000-6-2:2005
Methods
Standard methods 4S00-0
In-Situ methods 1002-8-2009,1003-8-2009,
1004-8-2009 (EPA approved)
Materials of construction
Sensor cap
PC / PMMA
Probe body
ABS
Temperature sensor
Titanium
Cable
Polyurethane
DS/ADS430-EN
IMPORTANT (NOTE) There are some known interferents
such as: alcohols > 5 %; hydrogen peroxide > 3 %;
sodium hypochlorite (commercial bleach) > 3 %;
gaseous sulfur dioxide; gaseous chlorine. Organic
solvents and certain petroleum-based hydrocarbons
may swell the sensing element and destroy it. Examples
include, but are not limited to, acetone; chloroform;
methylene chloride and BTEX (benzene, toluene,
ethylbenzene, xylene) compounds.