User's Manual
Table Of Contents
- Chapter 1 Introduction
- 1.1 Package Contents
- 1.2 Controls
- Chapter 2 Installation and Operation
- Chapter 3 Using the Bluetooth® Car Kit
- Chapter 4 For Nokia Phones
- Chapter 5 For Philips Phones
- Chapter 6 For Siemens Phones
- Chapter 7 For Ericsson and Sony Ericsson Phones
- Chapter 8 For Sony Ericsson Phones (P800 and P900)
- Chapter 9 For Panasonic Phones
- Chapter 10 Motorola V3
- Chapter 11 O2 Xda Mini
- Chapter 12 Samsung Phones
- Chapter 13 Care and Maintenance
BLUETOOTH
®
CAR KIT - User Guide
NOTE: When you get into your vehicle and start the ignition, your phone will request
authorization to establish the Bluetooth
®
connection with the Car Kit.
You can bypass this request by applying the following procedure:
• In the Menu, select “Bluetooth
®
” and press “Select”.
• Select “Paired Devices”.
• “V3.18” is displayed. Press “Options”.
• When you see “Set as authorized” press “Select”.
• Disable by selecting “No”.
For more information, please refer to the instruction manual of your Nokia phone.
4.2 Voice Tags
You can use your phone to assign voice tags to the names in your phonebook. The Car Kit
allows you to use these voice tags to call your contacts. Just press the green button on the Car Kit
control unit and say the name of your contact after the beep.
Correct recording of the voice tags is very important. The reliability of the voice dialing system
depends of the standard of the recording. To obtain optimum operation, please, comply with
these recommendations:
• Speak out clearly and naturally.
• Make the recording in quiet place.
• Turn off your engine, radio and ventilation.
• Close the doors and windows.
Apply t he follow ing pr ocedure t o assign a voice t ag for N okia
6 3 1 0 , 6 3 1 0 i, 8 9 1 0 , 6 6 5 0 a nd 7 6 0 0 .
• Select “Names” on the phone, choose a name and press “Details”.
• Select “Options” and then select “Add Voice Tag”
• Select “Start” and say the name that is displayed.
To remove a voice tag:
• Go to the directory and select “Details” then “Options”.
• Go to “Voice Tag” and press “Select”.
• Press “Change” and you can record the voice tag.
• By pressing, “Erase”, you can delete the voice tag.
Page 11 of 37