User's Manual

BLUETOOTH
®
CAR KIT - User Guide
Chapter 5 For Philips Phones
The first time when you power up the Car Kit (or after resetting hands-free), you will need to
pair devices. Subsequently, all connections between your phone and the Car Kit are
automatically established when both devices are within a few meters range of each other. A
'beep' is heard when the connection is established.
5.1 Pairing
Check that the blue light on top of the Car Kit is ON. You should hear « Please pair device »
instruction for the first time. If not, reset your Car Kit by pressing the green and the red buttons
simultaneously for at least 2 seconds, and wait for « Please pair device » instruction.
Apply t he follow ing procedure for Philips Fisio 8 2 0 .
• Press the Menu key on your phone.
• Press → until “Settings”, validate and then press → until “Accessories” and validate.
• “Bluetooth
®
Headset” is displayed. Validate by pressing 5.
• “Detect” is displayed. Validate and wait during “Detecting”.
• Press 5 when you see “Car Kit”. Wait during “Detecting”. “Pairing” will appear at the
top of the screen.
• Enter the pairing password by typing 1234 and click “Ok”.
• A beep indicates that pairing has been successful.
Apply t he follow in g proce dure for Philips Fisio 8 2 5 .
• Press the Menu key on your phone.
• Press → until “Bluetooth
®
” and validate.
• “Bluetooth
®
headset” is displayed. Validate by pressing 5.
• “Detect” is displayed. Validate and wait during “Detecting”.
• Press 5 when you see “Car Kit”. Wait during “Detecting”. “Pairing” will appear at the
top of the screen.
• Enter the pairing password by typing 1234 and select “Ok”.
• A beep indicates that pairing has been successful.
IMPORTANT: Philips Fisio 820 and 825 refuse to connect to systems incorporating
the Bluetooth
®
technology if a menu is displayed. In order to ensure
that the phone reconnects to the Car Kit, make sure that you return to
the home screen.
Page 13 of 37