User's Manual

BLUETOOTH
®
CAR KIT - User Guide
Chapter 6 For Siemens Phones
The first time when you power up the Car Kit (or after resetting hands-free), you will need to
pair devices. Subsequently, all connections between your phone and the Car Kit are
automatically established when both devices are within a few meters range of each other. A
'beep' is heard when the connection is established.
6.1 Pairing
Check that the blue light on top of the Car Kit is ON. You should hear « Please pair device »
instruction for the first time. If not, reset your Car Kit by pressing the green and the red buttons
simultaneously for at least 2 seconds, and wait for « Please pair device » instruction.
Apply t he follow in g proce dure for Siem e n s S5 5 a nd S5 6 .
• Go to Menu, ►select “Settings” and press “Select” to validate.
• ▼Choose “Mod/Data” and validate with “Select”.
• ▼Choose “Bluetooth
®”
and press “Options”.
• If Bluetooth
®
is activated, the “BT Activated” will be displayed.
• If Bluetooth
®
is deactivated, “Activate BT” will be displayed. Select to activate this
function.
• ▼Search and validate with “Access”. Please wait.
• “1 Found” will be shown and then the “V3.18” is displayed. Press “Select”.
• “Enter BT Pin for V3.18” will be displayed. Enter 1234 and then click “Ok”.
• “Hands-free Trusted” will be displayed indicating the pairing has been successful.
IMPORTANT: If the phone does not display HANDS-FREE TRUSTED after pairing,
this procedure must be repeated for the system to operate correctly.
The Car Kit must first be reset by pressing the red and green buttons
simultaneously for at least 2 seconds. The Car Kit must also be deleted
from the list of KNOWN DEVICES.
Page 15 of 37