User's Manual

BLUETOOTH
®
CAR KIT - User Guide
Chapter 7 For Ericsson and Sony Ericsson Phones
The first time when you power up the Car Kit (or after resetting hands-free), you will need to
pair devices. Subsequently, all connections between your phone and the Car Kit are
automatically established when both devices are within a few meters range of each other. A
'beep' is heard when the connection is established.
7.1 Pairing
Check that the blue light on top of the Car Kit is ON. You should hear « Please pair device »
instruction for the first time. If not, reset your Car Kit by pressing the green and the red buttons
simultaneously for at least 2 seconds, and wait for « Please pair device » instruction.
Apply t he follow ing pr ocedure for Ericsson R5 2 0 m , T3 9 / 3 9 m ,
T6 8 / 6 8 m a nd Sony Ericsson T6 8 i.
• For T68/T68m/T68i, select “Connect” and then “Bluetooth
®”
.
• For R520/T39/T39m, press → until “Extras”. Then ↓ until “Bluetooth
®”
and press
“Yes”.
• Press ↓ until “Paired Devices” and press “Yes”. Then select “Add Device” and press
“Yes”.
• Select “Phone Initiates” and press “Yes”.
• Scroll down to “Headsets” or “Hands-free” and press “Yes”.
• “Searching” will be displayed and then “V3.18” is displayed. Press “Yes”.
• “Enter Password” will be displayed. Enter 1234 and then click “Yes”.
When pairing is completed, “Pairing Succeeded” will appear on the screen. Press “Yes” to
enter the name of the newly paired device.
Mobile phones using a hands-free profile are synchronized manually. Go to “Connections”,
“Accessories”, and then “Menu” to launch synchronization.
IMPORTANT: For Ericsson R520m, T68, T39 and Sony Ericsson T68i you must
dusable the infrared sensor or IrDa for the Car Kit to operate. Follow
this procedure: Press → until EXTRAS and then ↓ until INFRARED
PORT. Press YES and then ↓ until DISABLED. Press YES to
validate.
Page 17 of 37