User's Manual
Table Of Contents
- Chapter 1 Introduction
- 1.1 Package Contents
- 1.2 Controls
- Chapter 2 Installation and Operation
- Chapter 3 Using the Bluetooth® Car Kit
- Chapter 4 For Nokia Phones
- Chapter 5 For Philips Phones
- Chapter 6 For Siemens Phones
- Chapter 7 For Ericsson and Sony Ericsson Phones
- Chapter 8 For Sony Ericsson Phones (P800 and P900)
- Chapter 9 For Panasonic Phones
- Chapter 10 Motorola V3
- Chapter 11 O2 Xda Mini
- Chapter 12 Samsung Phones
- Chapter 13 Care and Maintenance
BLUETOOTH
®
CAR KIT - User Guide
Page 35 of 37
Chapter 12 Samsung Phones
The first time when you power up the Car Kit (or after resetting hands-free), you will need to
pair devices. Subsequently, all connections between your phone and the Car Kit are
automatically established when both devices are within a few meters range of each other. A
'beep' is heard when the connection is established.
12.1 Activating the Bluetooth
®
You must activate the Bluetooth
®
feature of your phone to establish a Bluetooth
®
connection
between your Pocket PC device and other Bluetooth
®
devices.
• Activate the Bluetooth
®
function on the phone.
• Select “Turn on” Bluetooth
®
.
• Tap “OK”.
12.2 Pairing to the Hand Phone
• Pair To Your Bluetooth
®
Phone
• Pairing will create the unique and encrypted wireless link between two Bluetooth
®
enabled devices such as your Bluetooth
®
enabled devices such as your Bluetooth phone
and Bluetooth
®
headset.
• Plug in the CAR KIT into the cigar-lighter socket.
• Set your Bluetooth
®
phone to "discover" the headset by following your phone's
instruction guide. Typically, the steps involve going to a "setup", "connect", or "
Bluetooth
®
" menu on your phone and then selecting the option to "discover" a
Bluetooth
®
device.
• Your phone will find the "V3.18" device and ask if you want to pair with it. Confirm this
by pressing "Yes" or "Ok".
• Enter passkey “1234”, then press "Yes" or "Ok".
12.3 Answering/Receiving a Call
When the phone is receiving a call on the CAR KIT.
• To receive a call, press the “Answer Key” once and audio will be hear from the speaker
• To switch calls while currently receiving a call, press the “Answer Key” button again.
To switch back to the other caller, press the “Answer Key” button again.
• To terminate the call, press down the Off Hook Button.