Ethernet Wireless Router
User Manual © Copyright 2007 All rights reserved. No part of this document may be reproduced, republished, or retransmitted in any form or by any means whatsoever, whether electronically or mechanically, including, but not limited to, by way of photocopying, recording, information recording, or through retrieval systems without the express written permission. We reserve the right to revise this document at any time without the obligation to notify any person and/or entity.
User Manual Contents About the Router........................................................................................................ 6 Requirements.............................................................................................. 7 Package Contents ........................................................................................ 7 Device Design .............................................................................................. 8 Getting Started........................
User Manual WAN.........................................................................................................................25 ATM..........................................................................................................................26 ADSL.........................................................................................................................27 Route.........................................................................................................
User Manual Wireless.................................................................................................................... 58 Basic .......................................................................................................... 58 Security...................................................................................................... 59 MAC Filter .................................................................................................. 59 Wireless Bridge.............
User Manual About the Router Your router offers an easy way of integrating your computer and other network devices into a single network. Here are some of the benefits you can obtain from using the router in your home or office: Integrated Modem Feature Your router is an ideal solution for high speed Internet connectivity. It is capable of handling the fastest data transfer speed from your Internet provider and sharing this within your local network devices.
User Manual Requirements Your computer must meet the following minimum requirements. Any operating system can be used Internet Explorer 4.0 or Netscape Navigator 3.02 233MHz processor CD-ROM Drive Ethernet network adapter An active DSL Internet account Package Contents Package contents are listed below. For any missing items, please contact your dealer immediately. Product contents vary for different models.
User Manual Device Design Label 1 2 3 4 POWER ETHERNET 1-4 WiFi DSL Page 8 of 72 Action Description Off No power is supplied to the device Steady light Connected to an AC power supply Off No Ethernet connection Steady light Connected to an Ethernet port Blinking light Transmitting/Receiving data Off Access point is disabled Steady light Access point is enabled Blinking light Transmitting/Receiving data Off No DSL signal Blinking light Establishing DSL signal Steady light DS
User Manual 5 INTERNET Off No Internet connection Green light Connected to the Internet Green Blinking light Transmitting/Receiving data Red Blinking light Cannot establish Internet connection 6 DSL Connecting the telephone cable 7 ETHERNET 1-4 Connecting with computers/devices through Ethernet cable 8 RESET Resetting the device. Press for 10 seconds to reset.
User Manual Getting Started Setting up the device is easy. The flowchart below provides an outline of the steps needed to complete the installation. Brief descriptions appear beside each step. Detailed instructions are provided in the subsequent pages. Plan your Network Remove/Disable Conflicts Setup the Router Connect to the Internet You may need to check some setting or disable some application before installation. Connect the telephone cables, Ethernet cables, and power adaptor.
User Manual Planning Your Network Before moving ahead to setup your network, it is a good idea to draw out a network diagram to help identify your network devices and plan out how to connect these devices. The illustration below is an example of a network diagram. To create a network diagram: For wireless devices, identify the wireless devices you want to include in the network For wired devices, identify which router port you want to use for each device.
User Manual Remove or Disable Conflicts To make sure the router installation moves on smoothly, you need to remove or disable conflicts that may interfere the installation. Probable conflicts may include: Internet sharing applications Proxy software Security software TCP/IP settings Internet properties Temporary Internet files Internet Sharing, Proxy, and Security Applications Internet sharing, proxy software, and firewall applications may interfere with the router installation.
User Manual Configuring TCP/IP Settings Check if your computer uses the default TCP/IP settings. To check the TCP/IP properties: 1. Select Start > Run. This opens the Run dialog box. 2. Enter control ncpa.cpl and then click OK. This opens the Network Connections in your computer. 3. Right-click LAN and then select Properties. This opens the Local Area Connection Properties dialog box. 4. Select Internet Protocol (TCP/IP) and then click Properties. This opens the Internet Protocol (TCP/IP) dialog box. 5.
User Manual Removing Temporary Internet Files Temporary Internet files are files from Web sites that are stored in your computer. Delete these files to clean the cache and remove footprints left by the Web pages you visited. To remove temporary Internet files: 1. Select Start > Run. This opens the Run dialog box. 2. Enter control and then click OK. This opens Control Panel. 3. Double-click Internet Options. This opens Internet Options. 4. In the Temporary Internet Files pane, click Delete Cookies. 5.
User Manual Setup the Device When installing the router, find an area where there are enough electrical outlets for the router, the main computer, and your other computer devices. To setup the router: 1. Plug one end of the Ethernet cable from the router’s ETHERNET port and then plug the other end into the Ethernet port in your computer. 2. If you have another device you need to connect through wire into the router, use another piece of Ethernet cable.
User Manual Connecting to the Internet There are two ways to connect to the Internet. You can either use the Web Interface or the Utility Wizard. Connecting Via Quick Setup To connect to the Inter via the Web Interface: 1. Open your browser. 2. Enter 192.168.1.1 and then press Enter. This opens Connect to 192.168.1.1. 3. Enter the User name and Password, and then click OK. The default User name and Password is admin. 4. Select Quick Setup. 5. Enter the connection settings a.
User Manual b. Select an Encapsulation Mode c. Enter the PPP Username and Password d. Enter PVC Settings e. Check Enable Wireless f. Enter an SSID 6. Click Save/Reboot.
User Manual Connecting Via the Setup Utility Wizard The Setup Utility Wizard can be used to configure your router. However, this only runs on Windows operating systems with a CD-ROM drive. To connect to the Internet thru Setup Utility Wizard: 1. Insert the Resource CD into your CD-ROM. 2. If the utility does not launch automatically, select Start > Run, enter D:\Setup.exe (where D: is your CD-ROM drive), and then click OK. This opens the Setup Utility. 3.
User Manual Connecting Wireless Devices After you setup the device settings through the main computer, you can connect other devices with wireless capabilities. Wireless devices relieve you from the task of laying out cables and allow you to use the Internet connection from your router. To the connect with wireless devices: 1. Turn on your wireless device. 2. Open the software you use to detect a wireless connection. This opens a window to ask for the connection settings. 3.
User Manual About the Web User Interface The Web Interface is used to configure the router settings. Accessing the Web User Interface To access the Web User Interface: 1. Open your browser. 2. Enter 192.168.1.1 and then press Enter. This opens Connect to 192.168.1.1. 3. Enter the User name and Password, and then click OK. The default User name and Password is admin.
User Manual Device Info Quick Setup Page 21 of 72
User Manual Advanced Setup Wireless Page 22 of 72
User Manual Diagnostics Management Page 23 of 72
User Manual Device Info Summary Summary provides an overview of the operating parameters used in your device. To view Summary: 1. Select Device Info. 2. Click Summary. WAN WAN displays a summary of the WAN connection settings. To view WAN: 1. Select Device Info. 2. Click WAN.
User Manual Statistics Statistical information is provided and displayed by LAN, WAN, ATM, and ADSL. LAN LAN displays a statistical summary of the data transaction for each interface. To view LAN statistics: 1. Select Device Info. 2. Click Statistics > LAN. WAN LAN displays a statistical summary of the data transaction for each connection. To view LAN statistics: 1. Select Device Info. 2. Click Statistics > WAN.
User Manual ATM Asynchronous Transfer Mode (ATM) displays a statistical summary of the data transaction for the ATM interface. To view ATM statistics: 1. Select Device Info. 2. Click Statistics > ATM.
User Manual ADSL ADSL displays a statistical summary of the ADSL connection. To view ADSL statistics: 1. Select Device Info. 2. Click Statistics > ADSL.
User Manual Route Route displays the routing rules implemented in the router. To view Route: 1. Select Device Info. 2. Click Router. ARP Address Resolution Protocol (ARP) displays the HW address of each IP device. To view ARP: 1. Select Device Info. 2. Click ARP.
User Manual DHCP DHSCP displays all the DHCP clients connected to the router. To view DHCP: 1. Select Device Info. 2. Click DHCP.
User Manual Quick Setup Quick Setup is used to establish an Internet connection. To use Quick Setup: 1. Open your browser. 2. Enter 192.168.1.1 and then press Enter. This opens Connect to 192.168.1.1. 3. Enter the User name and Password, and then click OK. The default User name and Password is admin. 4. Select Quick Setup. 5. Enter the connection settings a. Select a Protocol b. Select an Encapsulation Mode c.
User Manual d. Enter PVC Settings e. Check Enable Wireless f. Enter an SSID 6. Click Save/Reboot. The router will save your settings and reboot. It will connect to the Internet after the reboot. When the connection is established, the Internet LED on the router lights or blinks green.
User Manual Advanced Setup Advanced Setup provides configuration options for other router functions. WAN WAN allows you to add, edit, or remove WAN connections. To create a new WAN connection: 1. Select Advanced Setup. 2. Click WAN. 3. Click Add. 4. Enter the connection settings: a. Enter the ATM PVC Configuration, QoS Setting, and then click Next.
User Manual b. Select the Connection Type, Encapsulation, and then click Next. c. Enable/Disable Bridge Service d. Check the settings. Click Back to apply modifications. 5. Click Save.
User Manual LAN LAN allows you to modify the settings for your local network.
User Manual NAT The routers NAT features include Virtual Servers, Port Triggering, and DMZ Host. Virtual Servers Virtual Server allows you to direct incoming traffic from the Internet to a specific computer in your local network. A maximum 32 entries can be configured. Click Add to create a Virtual Server. As an example, to setup a web server on a computer using 192.168.1.88 as its IP Address, select HTTP as Service and enter 192.168.1.88 as the Server IP Address.
User Manual Port Triggering Some applications require that the specific ports in the router’s firewall be opened for access by the remote parties. For instance, an application uses port 25 for requests and port 113 for replies. If a computer on the LAN connects to port 25 on a remote server hosting this application, using Port Triggering on the router, incoming connections to port 113 (from the remote server) could be redirected to the PC which initiated the request.
User Manual Click Add to setup Port Triggering. DMZ Host If a computer is assigned as a DMZ Host, it will receive all the data from the Internet that do not belong to the list of applications configured as a Virtual Server. Enter the LAN IP address of the PC you wish to set as DMZ Host in the DMZ Host IP Address. If you need to disable the DMZ Host, just clear the DMZ Host IP Address field, and then click Save/Apply.
User Manual Page 38 of 72
User Manual Security IP Filtering The router supports IP Filtering which allows you to easily set up rules to control incoming and outgoing Internet traffic. The router provides two types of IP filtering: Outgoing IP Filtering and Incoming IP Filtering. Outgoing IP Filtering By default, the router allows all outgoing Internet traffic from the LAN but by setting up Outgoing IP Filtering rules, you can block some users and/or applications from accessing the Internet.
User Manual Source Port Enter the port number used by the application to block. Destination IP Address/Subnet Mask Enter the IP address of the remote server to which connection should be blocked. Destination Port Enter the destination port number used by the application to block. Click Save/Apply to take effect the settings. The new rule will then be displayed in the Outgoing IP Filtering table list. To delete the rule, click Remove checkbox next to the selected rule, and click Remove.
User Manual Key in the following parameters: Filter Name Key in the name of the filter rule. Protocol Select the IP protocol to allow. Source IP Address/Subnet Mask Enter the IP address of the remote server from which to allow connection. Source Port Enter the port number used by the application to allow. Destination IP Address/Subnet Mask Enter the IP address of the PC on the LAN to which connection is allowed. Destination Port Enter the destination port number used by the application to allow.
User Manual Parental Control Parental Control allows you to apply router access restrictions among LAN devices within specific times in a day. A maximum of 16 restriction rules can be created. To add restrictions, click Add. This opens the Time of Day Restriction page. Click Start to enable a restriction or click Stop to disable the rule. To delete a restriction, click Remove checkbox next to the selected restriction, and click Remove.
User Manual Quality of Service QoS gives you the capability to specify the level of quality to be provided for specific applications. By default, QoS is not enabled.
User Manual Queue Config Click Add to create a QoS Queue Configuration.
User Manual QoS Classification You can add or remove QoS Classification rules. Click Add to create a Network Traffic Class Rule.
User Manual Routing Default Gateway The Enable Automatic Assigned Default Gateway checkbox is ticked by default. The router will accept the first received Default Gateway assignment from one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s). Static Route If your LAN consists of multiple subnets and you want to manually define the data transmitting paths, Static Route is to be used.
User Manual To create a new Static Route, click Add. The Routing-Static Route Add page will shows up. The key settings for adding a new Static Route are explained: Destination Network Address Enter the network address to which the data packets are to be sent. Subnet Mask Enter the subnet mask for this destination. Use Gateway IP Address If you wish to use a specific gateway to reach the destination network, select this checkbox and then enter the IP address of the gateway.
User Manual DNS DNS Server DNS (Domain Name System) is an Internet service that translates domain names into IP addresses. Because domain names are alphabetic, they are easier to remember. However, the Internet is based on IP addresses. Therefore, each time you type a domain name, a DNS service must translate the name into the corresponding IP address. For example, the domain name www.example.com might translate to 198.105.232.4. The DNS system consists of a network of DNS servers.
User Manual Dynamic DNS The router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed host and domain name to a dynamic Internet IP Address. It is useful when you are hosting your own website, FTP server, or other server behind the router. Before using this feature, you need to sign up for DDNS service providers. The router supports these popular Dynamic DNS service providers: www.dyndns.org www.tzo.com Click Add to create a Dynamic DNS setting.
User Manual Using DynDNS.org Key in the following parameters: D-DNS provider Select DynDNS.org. Hostname Enter the hostname. Interface Select an interface. DynDNS Settings Enter your dyndns.org Username and password.
User Manual Using TZO Key in the following parameters: D-DNS provider Select TZO. Hostname Enter the hostname. Interface Select an interface. TZO Settings Enter your TZO e-mail and key.
User Manual DSL The DSL page allows you to select the modulation, the phone line pair and the capability. Print Server Your router supports the creation of a Print Server.
User Manual Port Mapping Port Mapping allows you to create groups composed of the various interfaces available in your router. Click Add to create a port mapping group.
User Manual IPSec Your router supports the authentication and encryption of data packets. Click Add New Connection to create an IPSec Setting.
User Manual Certificate Certificates are used to verify the identity of you and your peers. You can either create or import a Certificate Request.
User Manual Import Certificate Page 56 of 72
User Manual Trusted CA Trusted CA is used to verify the certificate of your peers. Click Import Certificate.
User Manual Wireless Basic The Wireless Basic page allows you to enable the wireless network and configure its basic settings.
User Manual Security The router supports all the popular wireless security protocols. MAC Filter MAC Filter allows you to add or remove the MAC Address of devices which will be allowed or denied access to the wireless network. Click Add to add a MAC Address.
User Manual Page 60 of 72
User Manual Wireless Bridge Wireless Bridge allows you to configure the router’s access point as a bridge.
User Manual Advanced Advanced Wireless allows you to configure detailed wireless settings.
User Manual Station Info Station Info scans wireless stations and displays their status.
User Manual Diagnostics The router has a diagnostic feature to test your DSL connection. You can use the diagnostic menu to perform the following test functions from the router. Testing the connection to your local network Testing the connection to your DSL service provider. Testing the connection to your Internet service provider.
User Manual Management Settings When it comes to managing the settings which you have executed to the router, you can choose to: Backup the settings as a configuration file stored onto your PC Update the current settings from a previously saved configuration file Erase the current settings and restore the default factory values Backup To backup the settings as a configuration file saved on your PC, click Backup Settings.
User Manual Restore Default To restore your router to its factory default settings, click Restore Default Settings. When prompted, click OK. Upon clicking OK, you will be prompted to follow the instruction as shown below. System Log This feature provides you a comprehensive list of log entries reporting events which you have configured for viewing. To view the log, click View System Log.
User Manual TR-069 Client As a TR-069 capable router, the Internet service provider can remotely update the settings of the device. Internet Time Enable Internet Time to automatically synchronize your time with a time server.
User Manual Access Control This feature enables you manage the user access rights for remote access management based on the Services being used, IP addresses and Passwords. Services Select which Services to allow and whether to allow from the LAN or the WAN.
User Manual IP Addresses The Access Control Mode is disabled by default. To allow remote management based on an authorized IP address, select Enable and click Add. Key in the IP address of the PC from which a user will be allowed to access the web configuration menu. Click Save/Apply to take effect the settings. Then the IP Address will be added into the table list. To delete the existing IP address, tick the Remove checkbox next to the selected IP address in the table list and click then Remove.
User Manual Passwords When you configure the router through an Internet browser, the system requires you to enter your user name and password to validate your access permission. By default, the Username is set to “admin” and the Password to “admin”.
User Manual Update Software The router’s software is stored in the FLASH memory and can be upgraded as new software is released. Click Browse to locate the software file and then click Update Software. Save/Reboot This feature allows the router to enable new network configuration to take effect or to clear problems with the modem router’s network connection.
User Manual Safety Precautions Do not open, service, or change any component. Only qualified technical specialists are allowed to service the equipment. Observe safety precautions to avoid electric shock Check voltage before connecting to the power supply. Connecting to the wrong voltage will damage the equipment.