User's Manual

User Manual
Key in the following parameters:
Filter Name Key in the name of the filter rule.
Protocol Select the IP protocol to allow.
Source IP Address/Subnet Mask Enter the IP address of the remote server from
which to allow connection.
Source Port Enter the port number used by the application to allow.
Destination IP Address/Subnet Mask Enter the IP address of the PC on the LAN to
which connection is allowed.
Destination Port Enter the destination port number used by the application to
allow.
Click Save/Apply to take effect the settings. The new rule will then be displayed
in the Incoming IP Filtering table list.
To delete the rule, click Remove checkbox next to the selected rule, and click
Remove.
Page 41 of 72