User's Manual

Easy Start
Introduction
Thank you on your purchase of the ADSL Wireless LAN 4-Port Ethernet Router! The Wireless
4-Port Router allows you to share high-speed broadband connection with multiple PC using a
single device wired or wireless.
The Wireless Broadband 4-Port Router can be connected to any computer/notebook with a
10/100 Base-T Ethernet card for wired connection or an IEEE 802.11g Wireless adapter. The
Ethernet ports have Auto MDI/MDIX feature which can allows both cross or straight UTP
cable to be utilized. The Wireless 4-port Ethernet Router has an in-built IEEE802.11g
Wireless LAN Access Point for wireless connectivity.
This documentation assumes that you have already installed an Ethernet card or a wireless
adapter on your computer/notebook
Minimum System Requirements
• Pentium
®
MMX 233MHz
• Ethernet card installed with TCP/IP Protocol (Required only if you are connecting to
the ETHERNET port of your ADSL Router)
• IEEE 802.11b Wireless adapter (Required if you are connecting to the Wireless
Access Point of the router)
• OS independent for Ethernet
• Web Browser support:
Microsoft Internet Explorer 4.0 (or later versions)
Netscape® Navigator 3.02 (or later versions)
ADSL Router Package
For any missing items, please contact your dealer immediately.
ADSL Ethernet Wireless Router Easy Start Telephone extension cable
Power adapter (DC 12V) CAT-5 UTP Straight Ethernet Network cable (RJ-45)
POTS-Splitter
1
(optional)
1 Depending on your country of purchase, your package may or may not come with a
POTS Splitter. The POTS Splitter is required if you are connecting a Telephone Set to the
Ethernet Modem. Please refer to Step 1.2 - Connecting to the ADSL Line for details.
POTS-Splitter can also be purchased from your dealer.
3 of 13