User's Manual
Table Of Contents
- Countries of Operation and Conditions of Use in the European Community
- Introduction
- Minimum System Requirements
- ADSL Router Package
- POTS-Splitter1 (optional)
- ADSL Router Overview
- Typical ADSL Router Connections
- Step 1: Connecting the ADSL Router to Your Computer/Notebook
- Checking Your Connections
- Powering On
- Step 2: Configuring Your Ethernet Network Card
- Step 3: Configuring Your Internet Browser
- Step 4: Connecting to the Internet
Easy Start
Back Panel
l DSL
Telephone jack (RJ-11) to connect to your Telephone Wall Socket (ADSL line).
m RESET
To reset your ADSL Router to factory default settings.(All customised settings that you
have saved will be lost!)Please refer to the below footer
2
on how to activate the reset
function.
n ETHERNET
10/100 Base-T Ethernet jack (RJ-45) to connect to your Ethernet Network card or
Ethernet Hub / Switch.
oDC IN
To connect to the Power Adapter that comes with your package.
p POWER SWITCH
To power on or off the modem.
I - indicates ON position
O - indicates OFF position.
q RF Antenna
180° 2.4Ghz Wireless Antenna.
2 To activate the reset function:
- Ensure that your ADSL Router is powered on.
- Use a paper clip or a pencil tip to depress the reset button and release. At
this point, the DSL indicator light will go off, followed by the ETHERNET indicators.
The reset is in progress.
- When the DSL indicator starts blinking, it means that the reset process is
completed. The default settings are now restored.
- ADSL line is established once the DSL indicator lights up.
5 of 13