User's Manual

Table Of Contents

Easy StartEasy Start

Easy Start

ii Ensure that the field Connect Using indicates the model of your Ethernet Card that

is connected to your ADSL Router.

(This is important especially if you have more than one Local Area Connection icons displayed

at the Network and Dial-up Connections / Network Connections window. Ensure that you have

selected the correct one.)

Select Internet Protocol (TCP/IP) and click Properties.

iii Select the option Obtain an IP

address automatically and click OK.

Click OK again to close.

Ensure that your CABLE/DSL Wireless

Router is powered on. Restart your

system.

Proceed to

Step 3.

2.3 For Windows

2000 / Windows

i Windows® 2000:

a) From your Windows desktop, right-click on the icon My Network Places and

select Properties.

b) At the Network and Dial-up Connections window, right-click on the Local Area

Connection icon and select Properties.

Windows® XP:

(Instructions are based on default Start menu option)

a) From your Windows desktop, click

Start > All Programs > Accessories >

Communications > Network Connections.

b) Right-click on the

Local Area Connection icon that reflects the model of your

Ethernet Card that is connected to your CABLE/DSL Wireless Router and click

Properties.

(This screen shot uses 3Com EtherLink

Ethernet card model as an example).