User's Manual

5
Easy StartEasy Start
Easy StartEasy Start
Easy Start
2 To activate the reset function:
- Ensure that your CABLE/DSL Router is powered on.
- Use a paper clip or a pencil tip to depress the reset button and release. At this point, the
WAN indicator light will go off, followed by the ETHERNET indicators. The reset is in
progress.
- When the WAN indicator light up or blinking, it means that the reset process is completed.
The default settings are now restored.
l POWER SWITCH
To power on or off the modem.
I - indicates ON position
O - indicates OFF position.
m
DC IN
To connect to the Power Adapter that comes with your package.
n RESET
To reset your CABLE/DSL Wireless Router to factory default settings.(All customised
settings that you have saved will be lost!)Please refer to the below footer
2
on how to
activate the reset function.
o ETHERNET
10/100 Base-T Ethernet jack (RJ-45) to connect to your Ethernet Network card or
Ethernet Hub / Switch
p Modem
To connect to the CABLE/DSL modem.
q RF Antenna
180
0
2.4Ghz Wireless Antenna.
Back Indicators
l
m
n
o
p
q