User's Manual

User Manual
Page 25 of 35
Setting a Static IP on your PC
The WL556E Wireless N Repeater will only give an IP address to your PC upon initial
installation. Once you have associated it with your Wireless Router/AP, you will no
longer have access to the device’s web GUI. If you wish to change any settings on the
WL556E, you need to set a Static IP address on your PC. Just remember to set it back
to “Obtain and IP address automatically” after you are done.
To set a static IP address on your PC using Windows XP:
1. Click Start > Control Panel
2. Click on Network and Internet Connections
3. Click on Network Connections