User guide

ADSL2+ 4-Port Ethernet USB Wireless-G Router - User Guide
Chapter 2 – ADSL Router Description
The ADSL2+ 4 port Ethernet USB Wireless Router is a high-speed WAN bridge/router. This
full-featured product is specifically designed to allow maximum of 4 Ethernet-workstations to be
connected to the Internet and directly connect to your local area network via high speed 10/100
Mbps Ethernet. Users using wireless workstations will be able to connect to the Internet using
802.11g wireless technology. The ADSL Router has also full NAT firewall and DMZ services to
block unwanted users from accessing your network.
For game users, the ADSL Router had already pre configured for several low latency game ports.
Just click on the game you are playing on line and the rest is done for you.
The ADSL Router is fully compatible with all PCs; as long as the PC supports an Ethernet
interface and is running a TCP/IP protocol stack, your PC can have high-speed WAN access.
So, plug in the ADSL Router (refer to easy start guide), configure it (per your ISP’s
requirements) and enjoy the fast Internet access like never before.
2.1 ADSL Router Overview
Figure 1-1 shows the system configuration diagram of a typical Wireless-G router connection.
Computers or Notebooks with Ethernet
Network Cards.
ADSL Router
Computers or Notebooks with
Wireless PC cards or USB Clients.
Figure 1-1 : Wireless-G System Configuration Diagram
Page 12 of 87