User guide

ADSL2+ 4-Port Ethernet USB Wireless-G Router - User Guide
4.5.14 TR-068 WAN Access
The TR-068 WAN Access page (Figure 1-26) enables you to give temporary permission to
someone (such as technical support staff) to be able to access your router from the WAN side.
From the moment the account is enabled, the user is expected to log in within 20 active minutes,
otherwise the account expires. Once the user has logged in, if the session remains inactive for
more than 20 minutes, the user will be logged out and the account expires.
Figure 1-26 : TR-068 WAN Access
To create a temporary user account for a remote access to your router, follow the procedure
below.
1. Check WAN Update to enable write privilege of the router.
2. Check WAN Access to enable read privilege of the router.
3. Enter a user name and password in the User Name and Password fields.
4. Enter a port number In the Port field (for example, 51003).
5. Click Apply to temporarily activate the settings on the page.
Note—The changes take effect when you click Apply; however, if the router configuration is not
saved, these changes will be lost upon reboot.
6. To make the change permanent, click Save Settings.
7. To access your router remotely, enter the following in the URL:
http(s)://WAN IP of router:Port Number
Page 36 of 87